1. Current activities
Vienna, 10th May 2017

2. TAF-TSI changes

3. Changes in PCS
Dedicated test environment for the pilot:
Operation points from CRD
IM Parameters from PCS Production TT2018
PCS Core application with TAF-TSI changes, but without Loco types
Process related changes
 The following actions will be possible for the leading RU from Draft Offer phase:
directly submit Active Timetable, the transition Post-processing will be skipped which is the behavior today
do Withdraw, an option that is not supported today, that will effectively bring the dossier back to Harmonization phase. The IM timetable will be lost and the last version of the dossier in Harmonization will be revived
do 'Return to Path Elaboration' which will change the phase to Path Elaboration and give appropriate dossier permissions (read for RU's, write for IM's). The last dossier version in Path Elaboration will be revived. Pap requests status changes in some cases will be necessary from drafted to reserved, tailor-made will stay tailor-made.
New process type: ad-hoc with pre-accepted offer (type of information – 19). This means that once Draft Offer is submitted by the leading IM the dossier will immediately transition to Active timetable phase.
22 November 2018

4. Changes in PCS Train ID:
This identifier should be stored on the dossier level in the Basic Data (under the international train number field). 
It should be possible to define it during the dossier creation wizard in the 1st step and later it should be visible in the Basic Data.
As the modification of the train id is not supported in later phases, the Leading RU can modify it only in Open phase. After releasing the dossier to Harmonization the field should be blocked.
Path request ID/Path ID:
TsiPathID element is added to PCS
Available only in web-services and defined as optional element
Path Request ID meaning RU timetable (modification until the end of Harmonization)
Path ID meaning IM timetable (modification undil the end of Ad-Hoc request Offer)
Traction mode new value:
„No leading Engine” is added to the list
22 November 2018

5. Changes in PCS TrainCC system code table update →
Route Class code list:
Free text field was replaced with the following list:
A, B, C, D, E, F, G, C2, C4, CM2, CM3, CM4, CM,
CE, D2, D4, A2, A4, B1, B2, C3, D3, E4, E5
Brake type: „X” was added to the list
Spelling mistakes had been fixed for „Braking” (instead of „Breaking”)
Dangerous goods indication - new fields
Danger Label: It should be added to the dangerous goods area. Free text.
Dangerous Goods Volume: It should be added to the dangerous goods area. Values are expected in cubic meters.
Limited Quantiy Indicator: New check box in the dangerous goods area.
ETCS Level 0
EBICAB 700
NEXTEO
ASFA
ETCS Level NSC LS
DAAT
EBICAB 900
ETCS Level 1
ZUB 123
EVM
SELCAB
ETCS Level 2
ALSN
CAWS
SIGNUM
ETCS Level 3
ATP-VR/RHK
ATP
ZUB
PZB
KVB
BACC
ATB 1st Gen
LZB
TVM 300
RSDD/SCMT
ATB Next Gen
Crocodile
TVM 430
SSC
GW ATP
TBL 1
KVBP
MEMOR II+
RETB
TBL 2
KCVP
SHP
TPWS
TVM 430TBL1+
KCVB
PKP
22 November 2018

6. IP Consolidation package

7. IP Consolidation package
National Systems
Web-Service Request
PCS IP
PCS Core
Web-Service Request
Response/Error Code
Notification Service
National Systems
Web-Service Request
PCS Core
Response/Error Code
Notification Service
22 November 2018

8. IP Consolidation package
As PCS IP tries also to resolve ACL issues as PCS Core, it can happen that the result on the GUI and via IP is different. The aim of the development to remove this additional layer in front of PCS Core and PCS interface partners would send the web-service operations directly to PCS Core.
Expected benefits:
Decrease of performance issues
Decrease of confusing error/response codes, for example:
RC 100, when nothing happened in the Core
RC 302 on IP, when the action is possible via the GUI
Decrease of development time on the interface side
Fix open issues like problems in Path Alteration
Expected consequences:
the IP addresses will be changed on RNE side
22 November 2018

9. Planned scope for November 2017

10. Tasks until November PaP Product definition 1st and 2nd step
Pre-booking phase for PaP requests
RFC acceptance indicator separation from the IM indicators
C-OSS timetable
RFC Short Term Path Requests Pilot
N day rule adjustment to be able to publish PaPs for real short term
Empty Envelope Concept
Project participation
Wireframe creation
Business analysis
22 November 2018

11. Tasks until November Selected CRs – in specification phase currently
Notification Module (1074, 1084, 1091, 1258, 1049, 1207)
Possibility to subscribe/unsubscribe to notifications
New type of notifications
Labels (1266)
Activation attachment function during the observation phase (1287) – will be already in a patch
Wrong dossier version nr. via interface (1050)
Common mandatory parameters (1137)
„Trivials”: 1182, 1176, 1192, 1199, 1205, 1201, 1222, 1260, 1259
22 November 2018