1. Thank You For The Opportunity To Introduce
AdChem Manufacturing Technologies, Inc.
ACMT Inc. Specializes In The Following Products And Processes

2. Distribution and Repackaging of Specially Formulated Materials
AdChem Manufacturing Technologies, Inc.
Specialty formulating and packaging ranging from 10cc syringes to 5 gallon containers of the following
Silicones & silicone fluids, epoxies, polyurethane's
Sealants
Resins
Thread locking
Specialty and reagent grade chemicals

3. Bonding AdChem Manufacturing Technologies, Inc.
Rubber to metal bonding
Rubber to composite bonding
Insulating coatings
Vibration dampening
Wear resistance
Epoxy bonding
Composite component assembly and repair
Rubber molding
Plastic injection molded assemblies

4. Component Fabrication
AdChem Manufacturing Technologies, Inc.
Component manufacturing and fabrication
In house tool design and fabrication 3 axis CNC machining
Hot & cold metal forming
Surface coating & paint
Titanium Hot Forming
Acid Clean line
CNC press break forming
Titanium and Nickel welding both resistance and fusion.

5. Molding Silicones, urethanes & epoxies
AdChem Manufacturing Technologies, Inc.
Silicones, urethanes & epoxies
Compression and transfer molding
On staff design and tool fabrication team to satisfy your molding needs
Plastic injection mold assemblies

6. Overhaul and Repair FAA repair # H03R013Y
AdChem Manufacturing Technologies, Inc.
Overhaul and Repair
Fully equipped overhaul & repair shop
Rubber replacement
Tear down & reassembly
Welding
Machining
Blend & de-burr
FAA repair # H03R013Y

7. Welding Seam Welding, Spot Welding, Titanium Welding,
AdChem Manufacturing Technologies, Inc.
Welding
Seam Welding,
Spot Welding,
Titanium Welding,
Full resistance welding capabilities
NADCAP

8. 2D Flat Pattern Cutting Mazak X48 Laser OMAX Water Jet
AdChem Manufacturing Technologies, Inc.
2D Flat Pattern Cutting
Mazak X48 Laser
MAZAK Super TURBO X-48, 4' x 8' Sheet Capacity, 1500 Watt,
Certified Process
MAZAK L-32 CNC
OMAX Water Jet
Two-axis high-pressure abrasive water jet cutting system
Certified Process
can work with a wide variety of materials, ranging from metals to ceramics, composites, glass—even marble and granite. 

9. Quality Assurance AdChem Manufacturing Technologies, Inc.
State of the art scanning CMM inspection
Airfoil Inspection/correlation
ISO9001:2000 registered
AS9100:2004 registered
FAA Repair Station H03R013Y
Pratt & Whitney engineering source approved (ESA)
NADCAP Accredited
State of the art clean rooms for both Silicones and Non-silicones

10. Complete Laboratory Capabilities
AdChem Manufacturing Technologies, Inc.
Complete Laboratory Capabilities
In-house full service laboratory for metal and non-metal with destructive and non-destructive testing capabilities.

11. Material Testing AdChem Manufacturing Technologies, Inc.
Full in-house material testing
Pratt & Whitney laboratory controlled source (LCS)
Testing urethanes, silicones, epoxies, primers and adhesives
Tests performed to ASTM standards by experienced and knowledgeable lab technicians

12. Process Control Complete process control through:
AdChem Manufacturing Technologies, Inc.
Complete process control through:
Detailed photographic work instructions
Extensive operator training
Thermocouple and chart monitored cure cycles
Periodic audits
In process inspections

13. Technical Assistance AdChem Manufacturing Technologies, Inc.
Full engineering staff
Complete design capabilities using SOLIDWORKS, CADKEY, Unigraphics
PWA airfoil capable
Tool design and making capabilities
Fully accessible via the internet at

14. Contact Us AdChem Manufacturing Technologies, Inc. Phone
Fax
President/Sales
Address:
369 progress drive, Manchester, CT

15. We Will Assist in the Design and Fabrication of any Metal or Non-metallic Component Manufacturing and Assembly Necessary to Fulfill Your Requirements.
AdChem Manufacturing Technologies, Inc.