1. 08:00 Meeting Fri. June 18 Mon. June 21 Tue. June 22 Wed. June 23
Thurs. June 24
Fri. June 25
Mon. June 28
8a-4p
Mech. Team
Fasten TEM to Mini-CAL
TEM-TKR flex cable mates
Setup for Single Bay LPT
Gary
Setup for Van Der Graaff test
Elec.Team, Online
Single Bay LPT
Gary, Mech.Team
Repair Van Der Graaff
CAL pedestal & noise calibration
Reset CAL thresholds
Mech. Team, QA
Transport EM2 TEM/TPS and EGSE to bld 33
Inspection of EM2 TEM/TPS
Setup for EM2 TEM/TPS bench test
EM2 TEM/TPS safe-to-mate test
Swap-in EM2 TEM/TPS
Set CAL thresholds
Test runs
Gary, Mech. Team
Setup for Van De Graaff Test
Test Runs
Setup for Van De Graaff data taking
Collect test data
Offline
Van De Graaff data analysis (test runs)
Van De Graaff operations
Elec.Team
Van De Graaff data taking
Van De Graaff data analysis
Build/install protective cage
Ship Mini-Tower assembly to bld 84 ELX lab
4p-8p
Cosmic Ray data analysis (test runs)
Post-ship Single Bay LPT

2. Action Items Repair Van De Graaff – Gary Godfrey, Reggie Rogers
Transportation of EM2 TEM/PSU and EGSE to bld 33 – Eliazar Ortiz
Mechanical inspection of EM2 TEM/PSU connectors and standoff holes – Eliazar Ortiz, Joe Cullinan, Tom Borden, Jerry Clinton
Setup for EM2 TEM/PSU bench tests – Eliazar Ortiz
Proof test of Mini-Tower assembly lift fixture – Dave Kiehl
Build Mini-Tower assembly cart/cage – Tom Nieland
EM2 TEM/PSU Safe-to-mate Test – Brian Horwitz
Swap-in EM2 TEM/PSU – Eliazar Ortiz
Setup for Single Bay LPT – Eliazar Ortiz
Execute Single Bay LPT (w/ EM2 TEM/PSU) – Brian Horwitz, John Canfield, Jim Panetta, Lester Miller
CAL pedestal and noise calibration (compare w/ EM1) – Brian Horwitz
Execute CAL CPT – Brian Horwitz, John Canfield
Execute TKR CPT – Brian Horwitz, John Canfield
Setup operator workstations in room 102 – John Canfield
Operator training (Gary, Tune, Larry, Brian, John) for data taking – Online, Offline
Check Cosmic Ray test data – Xin Chen