1. LOM 320 BITZER ECOSTAR – CONTROL LMC341 DIWE via BEST
inalambrico
Con software BEST software en la computadora - windows
Via Bluetooth 4.0
Via cable - USB
USB-Cable
~30 meters
~2 metros
LOM 320
Cable Cat 5e or higher must be used for the LOM 320
Please note: Every device connected to an intranet or the Internet
must have a unique IP address. If two devices or computers have
the same IP address none of them will work and it may affect other
computers as well.
A Net mask is used to restrict how many IP addresses a computer can
see. To ensure a good performance most devices use the Net mask
and this also applies to the LOM320.
A Net mask of means a device can only see other
devices where the first 3 groups are the same, i.e. a laptop would have
to have an IP address like to be able to access the web
server on the LOM320 at IP address
The LOM320 has a default static IP address of and a
fixed Net mask of A dynamic allocation of an IP address
from a DHCP server is not supported.
The LOM320 will therefore always have the same IP address.
The IP address of the LOM320 can be changed on the LUP operating
panel connected to the LMC300 controller or from LMT – Lodam Multi
Tool PC software tool.

2. BITZER ECOSTAR – CONTROL LMC341 DIWE via WEB
Via Internet Explorer
Cable RJ45 ( Router )
Totalmente disponible
RJ45
www
via Internet
LOM 320
Cable Cat 5e or higher must be used for the LOM 320
Please note: Every device connected to an intranet or the Internet
must have a unique IP address. If two devices or computers have
the same IP address none of them will work and it may affect other
computers as well.
A Net mask is used to restrict how many IP addresses a computer can
see. To ensure a good performance most devices use the Net mask
and this also applies to the LOM320.
A Net mask of means a device can only see other
devices where the first 3 groups are the same, i.e. a laptop would have
to have an IP address like to be able to access the web
server on the LOM320 at IP address
The LOM320 has a default static IP address of and a
fixed Net mask of A dynamic allocation of an IP address
from a DHCP server is not supported.
The LOM320 will therefore always have the same IP address.
The IP address of the LOM320 can be changed on the LUP operating
panel connected to the LMC300 controller or from LMT – Lodam Multi
Tool PC software tool.

3. Gracias