1. Starter of the day Pick up your sketchbooks covers.
If you were not here last time pick up a long blank paper.
Pick up twelve small papers from the stack.
Once done sit quietly and wait for class to start.

2. Jewelry Day 2
Safety First

3. Agenda Review of last time
Disclosure statement due (more have been printed for those who did not get one last time)
How to make a sketchbook
Safety first discussion (take notes in book)
Tour of the lab
Safety test next time

4. Last Time! We made our book covers
We handed out the disclosure for this class and assigned the due date for today.
We talked about the procedures for this class
If you were not here last time it is your responsibility to know the material you missed.
See the classroom website for more information.

5. Electronic device signal
During this time electronic Devices are prohibited.
This means cell phones should be put away
Headphones should be out and down.
Eyes should be on the teacher not looking down unless to take a note about something.

6. Required Materials & Fees
Students will need to bring a pencil to class daily for writing in class & daily sketches.
Fees:
Students are required to pay a fee for this course.
$15 – for students or $7 – for students with fee waver

7. Raise your hand now if you have any questions…
This is the time to ask questions about what we have covered.
Raise your hand now if you have any questions…

8. Section Sewn book Next time
Stitch your book and tie off.
Draw pictures with ink Or
Write text to decorate your book binding.

9. Safety First!
You will be working with a number of tools that need to be used appropriately to be safe.
In order to do this you must first pass the safety test.

10. Glue First we will work with glue.
Rubber cement is flammable and toxic if used incorrectly.
Keep all glue in the main area of the classroom where it is well ventilated and away from any open flames.

11. Drill Next we will be working with an industrial drill.
First you must keep your hands out of the way while drilling.

12. Drill
Second you must have on safety glasses while drilling at all times.

13. Drill
Lastly only two people can be in the lab drilling at a time so take turns.

14. Sawing
You will need three tools while sawing your metal. ALWAYS CUT AWAY FROM YOURSELF!
A clamp
A piece of wood to clamp down to your desk
A saw

18. Filing
After your piece has been cut out you need to file and sand it so it will not longer have sharp edges.
Start with files than move to sand paper.

19. Polishing
Once you have filed and sanded your piece you will be ready to polish.
Only two people can polish in the lab at one time.

20. Polishing
First do not have on any long jewelry or loose clothing that can be caught in the polisher.
Second you will need to put a polish on the wheel.
Last turn on the wheel and start polishing.
Note: It can get hot so if you need to use a clamp to polish.

21. How will you hang your piece?
You need to make a hole in your piece in order to hang it.
You will add a jump ring once done.

28. Procedures for Taking a test
Conversation – voice level 0
Help – raise hand and wait quietly
Activity – Reading through test and answering questions
Movement – remain in your seat at all times
Participation – Working the entire time on the test.
Success

29. Electronic device signal
During this time electronic Devices are prohibited.
This means cell phones should be put away
Headphones should be out and down (not even around you neck).
Eyes should be on the teacher not looking down unless to take a note about something.

30. Activity You are to answer every question to the best of your ability.
If you took notes you are welcome to use them on the test.
You cannot use your neighbor or your cell phone while taking the safety test.
Once you are done review your answers to make sure you got them all than turn in your test and wait quietly until everyone is finished.