1. Phys102 Lecture 12 Kirchhoff’s Rules
Key Points
Kirchhoff’s Junction Rule
Kirchhoff’s Loop Rule
Solving Linear Algebraic Equations
References
19-3.

2. Kirchhoff’s Rules
Some circuits cannot be broken down into series and parallel connections. For these circuits we use Kirchhoff’s rules.
Figure Currents can be calculated using Kirchhoff’s rules.

3. 19-3 Kirchhoff’s Rules
Junction rule: The sum of currents entering a junction equals the sum of the currents leaving it.

4. 19-3 Kirchhoff’s Rules
Loop rule: The sum of the changes in potential around a closed loop is zero.
Figure Changes in potential around the circuit in (a) are plotted in (b).

5. 19-3 Kirchhoff’s Rules Problem Solving: Kirchhoff’s Rules
Label each current, including its direction.
Identify unknowns.
Apply junction and loop rules; you will need as many independent equations as there are unknowns.
Solve the equations, being careful with signs. If the solution for a current is negative, that current is in the opposite direction from the one you have chosen.

6. Example: Using Kirchhoff’s rules.
Calculate the currents I1, I2, and I3 in the three branches of the circuit in the figure.
Solution: You will have two loop rules and one junction rule (there are two junctions but they both give the same rule, and only 2 of the 3 possible loop equations are independent). Algebraic manipulation will give I1 = A, I2 = 2.6 A, and I3 = 1.7 A.