Quaking, Shaking, Earth All about Earthquakes.

Quaking, Shaking, Earth All about Earthquakes

Free powerpoint template: www.brainybetty.com
What is an earthquake? Simply put: An earthquake is the shaking of the earth. Free powerpoint template:

Many buildings in Charleston, South Carolina, were damaged or destroyed by the large earthquake that occurred August 31, 1886. Picture from the United States Geological Service Free powerpoint template:

San Francisco, California, Earthquake April 18, East side of Howard Street near Seventeenth Street. All houses shifted toward the left. The tall house dropped from its south foundation wall and leaned against its neighbor Picture from USGS.GOV Free powerpoint template:

San Fernando, California, Earthquake February Collapsed overpass connecting Foothill Boulevard and the Golden State Freeway. Feb 10, 1971. Photo by R.E. Wallace, USGS. Free powerpoint template:

I.What causes an earthquake?
Earthquakes are the Earth's natural means of releasing stress. 1. Due to the constant motion of the Earth’s plates, stress is put on the edges of the plates. 2. To relieve this stress, the rocks tend to bend, compress, or stretch. An aerial view of the San Andreas fault in the Carrizo Plain, Central California. Picture from Free powerpoint template:

Locatin' the Shakin' 3. Focus: the place on the Earth’s crust where the pressure was released. 4. Epicenter: the spot on the Earth’s surface directly above the focus. Free powerpoint template:

II. Faults 1. If the force is great enough, the rocks will break. 2. An earthquake is the vibrations produced by the breaking of rock. 3. Most earthquakes occur near plate boundaries. The Hanshin expressway in Kobe, Japan collapsed due to an earthquake in 1995. Picture from Free powerpoint template:

A. Normal Fault 1. Rock above the fault surface moves downward in relation to rock below the fault surface. Free powerpoint template:

Normal Faults Free powerpoint template:

B. Reverse Fault 1. Reverse faults result from compression forces that squeeze rock. 2. If rock breaks from forces pushing from opposite directions, rock above a reverse fault surface is forced up and over the rock below the fault surface. Free powerpoint template:

Reverse Fault Free powerpoint template:

C. Strike-slip Fault 1. At a strike-slip fault, rocks on either side of the fault are moving past each other without much upward or downward movement. 2. The San Andreas Fault is the boundary between two of Earth’s plates that are moving sideways past each other. Free powerpoint template:

Strike Slip Fault Free powerpoint template:

III. How does energy created by an earthquake move through the Earth?
1.Seismic waves are energy waves that travel outward from the source of the earthquake. Free powerpoint template:

Surfin the Waves IV. Three Types of Waves
When earthquakes occur, three different types of seismic waves are produced. Free powerpoint template:

1. P Waves a. Primary waves (P-waves) cause particles in rocks to move back and forth in the same direction that the wave is traveling. b. P-Waves are the fastest waves and are felt first, usually as a bang or a thump. Free powerpoint template:

2. S Waves a. Secondary waves (S-waves) move through Earth by causing particles in rocks to move at right angles to the direction of wave travel. b. These waves are slower than P-Waves. Free powerpoint template:

3. L or Surface Waves a. Surface waves cause most of the destruction resulting from earthquakes. b. Surface waves (L-Waves) or land waves move rock particles in a backward, rolling motion and a side-to-side, swaying motion. Free powerpoint template:

V. How are seismic waves measured?
1. Seismic waves from earthquakes are measured with an instrument known as a seismograph. 2. Seismographs register the waves and record the time that each arrived. Free powerpoint template:

3. Three seismographs must pick up the vibrations and record them to find out the location of the focus and epicenter are (where the earthquake started and the rock broke). 4. Three circles intersect at the epicenter. Free powerpoint template:

A. Measuring Earthquake Magnitude
1. Magnitude is a measure of the energy that is released during an earthquake. Free powerpoint template:

B. Richter Scale 1. The Richter magnitude scale is used to describe the strength of an earthquake and is based on the height of the lines on the seismogram. Free powerpoint template:

Richter Scale 2. For each increase of 1.0 on the Richter scale, the height of the line on a seismogram is ten times greater. 3. However, about 32 times as much energy is released for every increase of 1.0 on the scale. Free powerpoint template:

Earthquake Severity Richter Earthquake Magnitudes Effects Less than 3.5 Generally not felt, but recorded. Often felt, but rarely causes damage. Under 6.0 At most slight damage to well-designed buildings. Can cause major damage to poorly constructed buildings over small regions. Can be destructive in areas up to about 100 kilometers across where people live. Major earthquake. Can cause serious damage over larger areas. 8 or greater Great earthquake. Can cause serious damage in areas several hundred kilometers across. Free powerpoint template:

Quaking, Shaking, Earth All about Earthquakes.

Similar presentations

Presentation on theme: "Quaking, Shaking, Earth All about Earthquakes."— Presentation transcript:

Similar presentations

About project

Feedback

Log in

Auth with social network:

Quaking, Shaking, Earth All about Earthquakes.

Similar presentations

Presentation on theme: "Quaking, Shaking, Earth All about Earthquakes."— Presentation transcript:

Similar presentations

About project

Feedback