1. Public Safety Radio System Pager Operation Motorola Minitor V

2. Two Frequency Store Voice with Scan and VIBRA-Page
What Was Purchased?
Two Frequency Store Voice with Scan and VIBRA-Page
Frequency One will be Paging Channel
Frequency Two will be County Wide
Scan mode will have the Paging Channel set as the Priority Channel when in scan mode.
2/22/2013
Minitor V Operation
Revision -

3. Function Switch
Function switch will be configured to 4 different function modes (monitor/selective call, scan, etc.) can be configured for any position of the switch.
When set to a monitor position, all voice communications on the selected channel is heard through the speaker. When monitoring all ordered alert options are functional.
2/22/2013
Minitor V Operation
Revision -

4. Function Switch Configuration 1 Channel Pagers
A - Selective Call F1, Vibrate Alert
B - Selective Call F1, Tone & Vibrate Alert
C - Selective Call F1, Tone Alert
D - Monitor F1, Tone & Vibrate Alert
F1 – Paging Channel
2/22/2013
Minitor V Operation
Revision -

5. Function Switch Configuration 2 Channel Pagers
A - Selective Call F1, Vibrate Alert
B - Selective Call F1, Tone & Vibrate Alert
C - Monitor F1, Tone & Vibrate Alert
D - Priority Scan F2
F1 – Paging Channel
F2 – FIREOPS1
2/22/2013
Minitor V Operation
Revision -

6. Reset Button
After receipt of a properly coded message and after completion of that message, the alert monitor will automatically reset to the programmed operational mode.
2/22/2013
Minitor V Operation
Revision -

7. Scan (Two-Frequency Models Only)
All alert monitors that are equipped with two frequencies are capable of scanning the two channels for selective call or monitoring purposes.
2/22/2013
Minitor V Operation
Revision -

8. Unread Message Indicators
The red LED turns on if there are any unread messages.
The pager generates a reminder alert approximately every two minutes when an unread message exists.
2/22/2013
Minitor V Operation
Revision -