1. Drawing 6
Drawings represented in presentations are for reference only. Because they are pictures of the drawings you will use as reference, lines may appear cooked or skewed. Always refer to the class handouts when recreating drawings.

2. Drawing 7
Drawings represented in presentations are for reference only. Because they are pictures of the drawings you will use as reference, lines may appear cooked or skewed. Always refer to the class handouts when recreating drawings.

3. What information should go on our class drawings?
Welcome!
CAD 1 – DO NOW
Discuss with your tablemates what information should go in the Titleblock of an architect’s drawing?
What information should go on our class drawings?
Write what you come up with in your Do Now. Each table will be called upon to give one piece of information. If another table steals your answer, have a backup or two ready.

4. How to Correctly Insert Titleblocks into CAD drawings
CAD I
Mr. Shea
Room 303

5. INSERTING A TITLEBLOCK
Click on the Layout tab at the bottom of your Workspace
Click on the Insert Tab at the top of the screen
Click on the BROWSE button
Browse to X:\CAD and select WE - TB – 2016.dwg
Make sure the Insertion Point is 0,0,0
Make sure the Scale is 1,1,1
Click the OK button

7. INSERTING A TITLEBLOCK
Click on the Layout tab at the bottom of your Workspace
Click on the Insert Tab at the top of the screen then the INSERT button (or type INSERT)
Click on the BROWSE button
Browse to X:\CAD and select WE - TB – 2016.dwg
Make sure the Insertion Point is 0,0,0
Make sure the Scale is 1,1,1
Click the OK button

9. INSERTING A TITLEBLOCK
Click on the Layout tab at the bottom of your Workspace
Click on the Insert Tab at the top of the screen then the INSERT button (or type INSERT)
Click on the BROWSE button
Browse to X:\CAD and select WE - TB – 2016.dwg
Make sure the Insertion Point is 0,0,0
Make sure the Scale is 1,1,1
Click the OK button

10. INSERTING A TITLEBLOCK
Click on the Layout tab at the bottom of your Workspace
Click on the Insert Tab at the top of the screen then the INSERT button (or type INSERT)
Click on the BROWSE button
Browse to X:\CAD and select WE - TB – 2016.dwg
Make sure the Insertion Point is 0,0,0
Make sure the Scale is 1,1,1
Click the OK button

11. INSERTING A TITLEBLOCK
Make sure the Insertion Point is 0,0,0
Make sure the Scale is 1,1,1
Click the OK button

13. INSERTING A TITLEBLOCK
Stretch the viewport to the drawing area of the Titleblock.
Click on the PAPER tab next to the Drawing Aid toolbar to work within the Viewport.
Zoom Extents (Z + [Enter] + E +[Enter])
Click on the MODEL tab to go back into Paper space
Print the drawing using the same procedure as before.

15. INSERTING A TITLEBLOCK
Stretch the viewport to the drawing area of the Titleblock.
Click on the PAPER tab next to the Drawing Aid toolbar to work within the Viewport.
Zoom Extents (Z + [Enter] + E +[Enter])
Click on the MODEL tab to go back into Paper space
Print the drawing using the same procedure as before.

17. INSERTING A TITLEBLOCK
Stretch the viewport to the drawing area of the Titleblock.
Click on the PAPER tab next to the Drawing Aid toolbar to work within the Viewport.
Zoom Extents (Z + [Enter] + E +[Enter])
Click on the MODEL tab to go back into Paper space
Print the drawing using the same procedure as before.

19. Going forward, (Drawing 8 and after) it is UNACCEPTABLE to hand in your drawing without the appropriate titleblock. Points will be deducted.

20. Drawing 8
Drawings represented in presentations are for reference only. Because they are pictures of the drawings you will use as reference, lines may appear cooked or skewed. Always refer to the class handouts when recreating drawings.