1. Structural Drafting
Assignment S-4

2. Framing Plan Dimensions Beam designations End reactions
Title and Scale

3. Connection Detail-A Beam designations Center to Center dimension
Gage outstanding leg (GOL) dimension
Cope cut dimensions (Q2 and Q1)
Hole spacing dimension
Assembly clearance dimension (C)
Setback dimension (1/2”)
Edge distance dimension for 3/4” diameter
fastener
Title and Scale

4. Connection Detail-B Beam designations Center to Center dimension
Gage outstanding leg (GOL) dimension
Cope cut dimensions (Q2 and Q1)
Hole spacing dimension
Assembly clearance dimension (C)
Setback dimension (1/2”)
Edge distance dimension for 3/4” diameter
fastener
Title and Scale

5. Shop Drawing (W18 x 60 Beam) Cope cut dimensions
Hole spacing dimension
Assembly clearance dimension (C)
Setback dimension (1/2”)
Edge distance dimension for 3/4”
diameter fastener
Beam length dimensions
Angle dimensions
Gage outstanding leg (GOL)
dimension
Center to Center dimension
Title and Scale

6. Shop drawing (W24 x 76 beam) Hole spacing dimension
Beam length dimensions
Center to Center dimension
The term Orthographic is derived from the word “orthos” meaning perpendicular or 90o

7. Shop drawing (W30 x 108 beam) Hole spacing dimension
Beam length dimensions
Center to Center dimension
The term Orthographic is derived from the word “orthos” meaning perpendicular or 90o 7

8. Erection Plan
Beam designations
Erection marks
Title and Scale

9. Bill of Materials
Each principle view has it’s own “point of sight”

10. General Notes