Download presentation
Presentation is loading. Please wait.
1
Pavement Preservation Roundtable
Pavement Strengthening: Combining the Compressive Strength of Asphalt with the Tensile Strength of Glass By Nicholas Reck (MSc.Eng, Pr.Eng) Benton County, 2/16/2016
2
Content Applications Current Interlayer Product Range
Recent Testing Data Specifications Questions
3
Applications 1.5” Asphalt Overlays or More Moisture Barrier
Crack Relief Structural Reinforcement
4
Products (Existing) Grid Types In USA Structure Types Polyester
Composite Only Fiberglass Open and Composite Steel Open Only Consider : Asphalt Modulus vs Grid Type Modulus at all Temperatures Consider Crack Type Speed of Movement vs Grid Type Modulus Consider Structure for maximum contribution of Grid Type
5
Products (Existing) GlasGrid GlasPave GlasGrid 8501 GlasPave25
6
Applications Updated Product Selection Guide:
7
Testing NCSU Results Plate Load Testing TTI Overlay Testing
8
Beam Tests (Lots of Variables!!) Notched (Fatigue)
NCSU Study Beam Tests (Lots of Variables!!) Notched (Fatigue) Un-notched (Crack Reflection) 100kN GlasGrid (1/2” and 1” apertures) 3 Tack Coats (PG, SS1, TF) 1 Temperature Approximately 3 years to complete vs Nottingham at 5 years
9
4 Point Strain Controlled Beam Test
NCSU Study 4 Point Strain Controlled Beam Test Cyclic Loading Composite stiffness loss Ref. NCSU Study Publish at TRB in 2015
10
Function: Reinforcement
4 Point Strain Controlled Beam Testing 2 Times Reinforced Unreinforced 11/24/201811/24/201811/24/2018
11
Plate Load Testing
12
Function: Reinforcement
Plate Load Testing Results 1.5 Example of field test results. This chart reflects the normalized results of 3 test sites – Tijuana, Mexico – Las Vegas, NV – Wilmington, NC Improvement of pavement structure modulus with 8511(TF) From Graph: Modulus of control = 33,521 psi Modulus of reinforced section = 50,045 psi Structural improvement with 8511(TF) Si = 50,045 / 33,521 Si = 1.5
13
Monatomic Asphalt Overlay Testing
Overlay Tester Typical Sample
14
Monatomic Asphalt Overlay Testing
Why Ease of Sample fabrication 6” diameter gyratory core samples Could be done on any project specific mix High level of repeatability Mention low cost of sample preperation
15
Monatomic Asphalt Overlay Testing
16
Monatomic Asphalt Overlay Testing
Strength (lbs) Displacement (inches)
17
Monatomic Asphalt Overlay Testing
18
Specifications Performance Based Specifications
19
Design Assistance
20
Updates Installation – Important - Certification?
21
Questions
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.