1. BTS3803E Initial Configuration
Security Level:
BTS3803E Initial Configuration
Documentation Dept
Jan. 2014

2. BTS3803E Initial Configuration
BTS3803E Initial Configuration provides guidance about data preparation for creating a BTS3803E at the initial stage of network deployment.
Writing oriented to user scenarios
User scenario orientation
Detailed description of GUIs
Clarity and Concreteness
Detailed description of data configuration
Completeness

3. Writing oriented to user scenarios
Level 1 of the document is organized based on user scenarios. Users read required information by scenario to ignore unnecessary information.
Three configuration methods are available for initial
configuration:
Creating a Single NodeB (CME-based)
Creating NodeBs in Batches (CME-based)
Configuring a Single NodeB (Using MML Commands)
(This method is presented starting from RAN16.0.)

4. Detailed description of GUIs
Use detailed GUIs to ensure step-by-step operations.
CME operations are complicated, and initial configuration requires many GUI operations.
Detailed GUIs are provided to ensure step-by-step operations.
In GUIs, operation steps are sequentially numbered.
Configuration steps correspond to GUI description.

5. Detailed description of data configuration
Chapters for configuration steps use detailed data configuration to ensure convenient operations.
In each configuration step, “Context” describes all MOs and parameters to be configured.