1. What Do You See?
Message of the Day: Informed forest management decisions need information about current and projected conditions

2. FOR 274: Forest Measurements and Inventory
Growth, Yield and Biomass
Overview
Growth Percentage
Allometrics
Modeling Growth and Yield
Husch, Beers and Kershaw pp , chapters 15 & 16

3. Growth and Yield: Overview
Growth: biological phenomenon of increase in size with time
Increment: quantitative increase in size in a specified time interval due to growth
Yield: the total amount (of timber) available for harvest

4. Growth and Yield: Overview
Current annual increment: growth within the past year
Periodic annual Increment: average growth of a series of years (5 or 10)
Mean annual increment: Current (cumulative) size divided by the age

5. Growth and Yield: Overview
Factors affecting growth include:
genetics
climatic factors (temp, precip, wind, etc)
soil factors (moisture, ph, etc)
topography (slope, elevation, aspect)
competition (influence of other trees)

6. Growth and Yield: Overview
To evaluate the usefulness of different treatment options we often use “growth and yield models” to forecast the dynamics of a stand.
Stand dynamics: Growth, mortality, reproduction, and other stand changes
Growth and yield models produce stand estimates (basal area, volume, trees per acre, etc)

7. Growth and Yield: Overview
Growth Curve: Size plotted against age
Sizes Include:
Heights
Volumes
Diameter
Weight 7

8. Growth and Yield: Overview
Growth Curve: S- (or sigmoid) shaped and shows cumulative growth at any age
Height
Age 8

9. Growth and Yield: Overview
Rate of Growth Curve: Rapid growth in youth with decreasing rate as tree matures
Rate
Age 9

10. Growth and Yield: Overview
Current and mean annual growth curves:
DBH Growth
Age 10

11. Growth and Yield: Growth Percentage
A measure of the average rate of change in size or volume over a given time interval
Growth percent = 100 * (V2-V1)/(N*V1)
V1 = Volume or size at start
V2 = Volume or size at end
N = number of years
This measure is analogous to interest rates as found in economics 11

12. Stand Growth: Overview
The fundamental components of stand growth are:
Accretion – growth of all the trees as measured at the start of the growth period
Mortality – Volume of trees initially measured that died and not utilized
Ingrowth – Volume of trees grown after start of the growth period (e.g., seedlings)

13. Stand Growth: Overview
The fundamental components of stand growth are:
Gross Growth – change in total volume of a stand (excluding mortality)
Net Growth – including mortality
Production = Net Growth + Ingrowth 13

14. Stand Growth: Overview
When considering ecosystems we use the following terms:
Gross primary productivity (GPP) – total amount of CO2 fixed by a plant (or stand of plants) due to photosynthesis
Net primary productivity (NPP) – net amount of CO2 fixed by the plant after respiration is subtracted from GPP
NPP = GPP - R
Net ecosystem productivity (NEP) – the net primary production after all respiration from plants, hetertophs, and decomposes are included
NEP = GPP – (Rp + Rh + Rd)
NEP is of great interest to people trying to understand the global carbon budget 14

15. Tree and Stand Biomass: Overview
Forest Biomass is defined as:
“The total quantity of aboveground live organic floristic matter expressed as an oven-dry (70°C for 24hrs) weight”
Biomass estimation is important for:
Plantation forests that are managed for production of pulpwood or energy
Quantifying bark etc for products produced from tannins, etc
Calculation of carbon pools and stocks for carbon credit trading
The study of other biogeochemical cycles

16. Tree and Stand Biomass: Components
The principal forest biomass components that we measure include:
Branches
Foliage
Stemwood
Bark
Roots
Entire young trees can be measured by felling but this is expensive and impracticable for mature tress  sampling methods

17. Tree and Stand Biomass: Branches and Foliage
Branch biomass is often measured by a 2-stage sampling method:
Branch diameter is measured 1-2” from main stem for all branches
A sub-sample are used to estimate over weight. Regression model the used to estimate total branch weight.
Foliage biomass is often measured by removing all the needles/leaves from the tree and calculating the oven-dry weight on the total or from a 25% sample

18. Tree and Stand Biomass: Stemwood and Bark
Stem wood biomass is often measured by:
Felled volume measured using Smalian’s formula in 3-10’ sections
Dry weight is calculated on cookies
Bark biomass is often clumped into stem wood calculations or can be achieved by removing and oven-drying the bark.

19. Tree and Stand Biomass: Root Biomass
Root biomass is often ignored because the weight estimation required the complete excavation of the root system:
It can be achieved using an AirSpade
If you add each estimate together to estimate tree biomass, remember to add the errors correctly

20. Allometrics: What is it?
Most people do not have access to the equipment or personnel to dig up roots. Therefore we use tree allometry.
Tree allometry is the development of quantitative relationships between “easy to measure” properties of tree growth and the “difficult to measure” metric you really need.
Easy to Measure: DBH, Heights, Leaf Area Index
Difficult to Measure: Total standing tree volume, total carbon content, root carbon

21. Allometrics: DBH only Relationships
Many types of allometric relationships exist. The simplest type all have equations of the form:
M = aDb
Where,
M = oven-fry weight of the biomass component (kg), D = DBH (cm), and a and b are relationship specific parameters
You already know 1 allometric eqn: BA = *DBH2 !!!

22. Allometrics: DBH only Relationships
A review of hundreds of tree allometric relations was conducted by: Ter-Meikaelian and Korsukhin (1997):

23. Allometrics: Branch Allometrics
A study by Monserud and Marshall (1999) developed equations to predict branch and crown area, leaf mass, and branch wood mass:

24. Forest Growth Model Systems: FVS
The Forest Vegetation Simulator (FVS) was developed by the USDA Forest Service and is a widely used to estimate forest growth in simulated stands.
Advantages: FVS is easy to use and includes modules that incorporate fire use and insects. Is being adapted to include spatial data and climate change. Outputs are things forest managers understand.
Disadvantages: Predominately based on correlations between growth and stand variables. Need relationships for each species. These relationships might change with changes in climate.

25. Forest Growth Model Systems: FVS
In timber management, FVS is widely used in the United States to summarize current and predict future stand conditions.
Other FVS uses include:
Evaluating management decisions on stand structure and composition
Evaluating wildlife habitats
Evaluating hazard ratings and estimating timber losses from insects, diseases, and fire

26. Forest Growth Model Systems: FVS
Using FVS is very easy.
From file/select locations file you can view one of the 3 pre-built examples
Numerous management options can be planned on specific years: thinning, harvest, Rx fire, etc
Output is tabular or using the SVS Movies post processor you can generate animations

27. Forest Growth Model Systems: FVS Output
Typical FVS Output Summary:
What happened between 2047 and 2057?

28. Forest Growth Model Systems: FVS Output
This simulation included:
Rx fire in 2050 under very dry conditions
Salvage in 2051 of hard and soft snags

29. Forest Growth Model Systems: Biome BGC
Biome BGC is a process model that can predict fluxes of carbon, energy, and water in the vegetation and soil
Advantages: Accounts for a wide range of physical and biological processes. As such can be applied to any species in any location; and adaptable to climate changes
Disadvantages: Required measurements more difficult to obtain. Although models “How” the plants grow – does not directly provide measures useful to forest managers – such as available timber for harvest, amount lost in fire, etc
Biome BGC will be covered in detail in FOR 330