1. Crash Recovery, Part 2 R&G - Chapter 18
If you are going to be in the logging business, one of the things that you have to do is to learn about heavy equipment.
Robert VanNatta,
Logging History of Columbia County
The slides for this text are organized into chapters. This lecture covers Chapter 20.
Chapter 1: Introduction to Database Systems
Chapter 2: The Entity-Relationship Model
Chapter 3: The Relational Model
Chapter 4 (Part A): Relational Algebra
Chapter 4 (Part B): Relational Calculus
Chapter 5: SQL: Queries, Programming, Triggers
Chapter 6: Query-by-Example (QBE)
Chapter 7: Storing Data: Disks and Files
Chapter 8: File Organizations and Indexing
Chapter 9: Tree-Structured Indexing
Chapter 10: Hash-Based Indexing
Chapter 11: External Sorting
Chapter 12 (Part A): Evaluation of Relational Operators
Chapter 12 (Part B): Evaluation of Relational Operators: Other Techniques
Chapter 13: Introduction to Query Optimization
Chapter 14: A Typical Relational Optimizer
Chapter 15: Schema Refinement and Normal Forms
Chapter 16 (Part A): Physical Database Design
Chapter 16 (Part B): Database Tuning
Chapter 17: Security
Chapter 18: Transaction Management Overview
Chapter 19: Concurrency Control
Chapter 20: Crash Recovery
Chapter 21: Parallel and Distributed Databases
Chapter 22: Internet Databases
Chapter 23: Decision Support
Chapter 24: Data Mining
Chapter 25: Object-Database Systems
Chapter 26: Spatial Data Management
Chapter 27: Deductive Databases
Chapter 28: Additional Topics

2. Motivation Atomicity: Transactions may abort (“Rollback”). Durability:
What if DBMS stops running? (Causes?)
Desired state after system restarts:
T1 & T3 should be durable.
T2, T4 & T5 should be aborted (effects not seen).
crash! T1 T2 T3 T4 T5
Commit
Abort
Commit

3. WAL & the Log LSNs DB pageLSNs RAM flushedLSN
Each log record has a unique Log Sequence Number (LSN).
LSNs always increasing.
Each data page contains a pageLSN.
The LSN of the most recent log record for an update to that page.
System keeps track of flushedLSN.
The max LSN flushed so far.
WAL: For a page i to be written
must flush log at least to the
point where:
pageLSNi £ flushedLSN
Log records
flushed to disk
flushedLSN
pageLSN
“Log tail”
in RAM

4. Log Records LogRecord fields: LSN prevLSN XID type pageID length
prevLSN is the LSN of the previous log record written by this Xact (so records of an Xact form a linked list backwards in time)
Possible log record types:
Update, Commit, Abort
Checkpoint (for log maintenance)
Compensation Log Records (CLRs)
for UNDO actions
End (end of commit or abort)
LogRecord fields:
LSN
prevLSN
XID
type
pageID
length
update
records
only
offset
before-image
after-image

5. Other Log-Related State
Two in-memory tables:
Transaction Table
One entry per currently active Xact.
entry removed when Xact commits or aborts
Contains XID, status (running/committing/aborting), and lastLSN (most recent LSN written by Xact).
Dirty Page Table:
One entry per dirty page currently in buffer pool.
Contains recLSN -- the LSN of the log record which first caused the page to be dirty.

6. The Big Picture: What’s Stored Where
LOG
RAM DB
LogRecords
Xact Table
lastLSN
status
Dirty Page Table
recLSN
flushedLSN
prevLSN
XID
type
length
pageID
offset
before-image
after-image
Data pages
each
with a
pageLSN
master record
LSN of
most recent
checkpoint

7. Normal Execution of an Xact
Series of reads & writes, followed by commit or abort.
We will assume that disk write is atomic.
In practice, additional details to deal with non-atomic writes.
Strict 2PL.
STEAL, NO-FORCE buffer management, with Write-Ahead Logging.

8. Checkpointing
Conceptually, keep log around for all time. Obviously this has performance/implementation problems…
Periodically, the DBMS creates a checkpoint, in order to minimize crash recovery time.
Write to log:
begin_checkpoint record: Indicates when chkpt began.
end_checkpoint record: Contains current Xact table and dirty page table. This is a `fuzzy checkpoint’:
Other Xacts continue to run; so these tables accurate only as of the time of the begin_checkpoint record.
No attempt to force dirty pages to disk; effectiveness of checkpoint limited by oldest unwritten change to a dirty page.
Store LSN of most recent checkpoint record in a safe place (master record).

9. Crash Recovery: Big Picture
Oldest log rec. of Xact active at crash
Start from a checkpoint (found via master record).
Three phases. Need to:
Analysis - Figure out which Xacts committed since checkpoint, which failed.
REDO all actions.
(repeat history)
UNDO effects of failed Xacts.
Smallest recLSN in dirty page table after Analysis
Last chkpt
CRASH A R U

10. Recovery: The Analysis Phase
Re-establish knowledge of state at checkpoint.
via transaction table and dirty page table stored in the checkpoint
Scan log forward from checkpoint.
End record: Remove Xact from Xact table.
Other records: Add Xact to Xact table, set lastLSN=LSN, (update Xact status).
also, for Update records: If page P not in Dirty Page Table, Add P to DPT, set its recLSN=LSN.
At end of Analysis…
transaction table says which xacts were active at time of crash.
DPT says which dirty pages might not have made it to disk

11. Phase 2: The REDO Phase
We repeat History to reconstruct state at crash:
Reapply all updates (even of aborted Xacts!), redo CLRs.
Scan forward from log rec containing smallest recLSN in DPT. Q: why start here?
For each update log record or CLR with a given LSN, REDO the action unless:
Affected page is not in the Dirty Page Table, or
Affected page is in D.P.T., but has recLSN > LSN, or
pageLSN (in DB) ³ LSN. (this last case requires I/O)
To REDO an action:
Reapply logged action.
Set pageLSN to LSN. No additional logging, no forcing!

12. Phase 3: The UNDO Phase
ToUndo={lastLSNs of all Xacts in the Trans Table}
Repeat:
Choose (and remove) largest LSN among ToUndo.
If this LSN is a CLR and undonextLSN==NULL
Write an End record for this Xact.
If this LSN is a CLR, and undonextLSN != NULL
Add undonextLSN to ToUndo
Else this LSN is an update. Undo the update, write a CLR, add prevLSN to ToUndo.
Until ToUndo is empty.

13. Example of Recovery LSN LOG RAM ToUndo 00 05 10 20 30 40 45 50 60
begin_checkpoint
end_checkpoint
update: T1 writes P5
update T2 writes P3
T1 abort
CLR: Undo T1 LSN 10
T1 End
update: T3 writes P1
update: T2 writes P5
CRASH
Xact Table
lastLSN
status
Dirty Page Table
recLSN
flushedLSN
prevLSNs
ToUndo

14. Example: Crash During Restart!
LSN LOG
00,05 10 20 30
40,45 50 60 70
80,85
90, 95
begin_checkpoint, end_checkpoint
update: T1 writes P5
update T2 writes P3
T1 abort
CLR: Undo T1 LSN 10, T1 End
update: T3 writes P1
update: T2 writes P5
CRASH, RESTART
CLR: Undo T2 LSN 60
CLR: Undo T3 LSN 50, T3 end
CLR: Undo T2 LSN 20, T2 end
RAM
undonextLSN
Xact Table
lastLSN
status
Dirty Page Table
recLSN
flushedLSN
ToUndo

15. Additional Crash Issues
What happens if system crashes during Analysis? During REDO?
How do you limit the amount of work in REDO?
Flush asynchronously in the background.
How do you limit the amount of work in UNDO?
Avoid long-running Xacts.

16. Summary of Logging/Recovery
Recovery Manager guarantees Atomicity & Durability.
Use WAL to allow STEAL/NO-FORCE w/o sacrificing correctness.
LSNs identify log records; linked into backwards chains per transaction (via prevLSN).
pageLSN allows comparison of data page and log records.

17. Summary, Cont.
Checkpointing: A quick way to limit the amount of log to scan on recovery.
Recovery works in 3 phases:
Analysis: Forward from checkpoint.
Redo: Forward from oldest recLSN.
Undo: Backward from end to first LSN of oldest Xact alive at crash.
Upon Undo, write CLRs.
Redo “repeats history”: Simplifies the logic!