2. ADALM-PLUTO KEY FEATURES ADALM-PLUTO runs embedded Linux! U-Boot Linux 4.6.0 kernel Username “root” and Root password: “analog” buildroot Busybox ~2 second boot time 32Mbytes of Flash 512Mbytes of DDR3

3. ADALM-PLUTO ARCHITECTURE

4. AD9361/63 AND AD9364(Single Channel Rx/Tx)

5. ADALM-PLUTO Specifications - Hack for 70 MHz to 6 GHz - Hack to Enable 2 nd ARM Core (Leantrx requires) - Bare PCB is 45 g - Bare PCB is 4.25” x 2.27” x 0.25” - USB OTG Hub + 10/100 Ethernet Adapter+USB Drive

6. ADALM-PLUTO SW/FW/FPGA ARCHITECTURE

8. ZYNQ Z-7010 FPGA Resources Used

9. QUESTIONS Does the PLUTO FPGA Build Incorporate the 2n RX/TX Logic Resources? Can I compile out the FPGA Resources for 2 nd RX and TX? 2 ARM Core enabled makes a big difference in FM Receiver Audio Quality Playback or Play.

10. KEY SPECs Temp range : 10°C to 40°C Easier to correct for oscillator we used USB 2.0 7 – 12 MSPS, depending on the host, without loosing samples. Oscillator (40 MHz) Rakon RXO3225M, ±25ppm (uncorrected) ±10ppm (factory calibrated) ±1ppm (tuned for temperature) Tx Output power 0dBm (CW), varies with frequency

11. libiio Library for interfacing with Linux IIO devices libiio is used to interface to the Linux Industrial Input/Output (IIO) Subsystem. The Linux IIO subsystem is intended to provide support for devices that in some sense are analog to digital or digital to analog converters (ADCs, DACs). This includes, but is not limited to ADCs, Accelerometers, Gyros, IMUs, Capacitance to Digital Converters (CDCs), Pressure Sensors, Color, Light and Proximity Sensors, Temperature Sensors, Magnetometers, DACs, DDS (Direct Digital Synthesis), PLLs (Phase Locked Loops), Variable/Programmable Gain Amplifiers (VGA, PGA), and RF transceivers. You can use libiio natively on an embedded Linux target (local mode), or use libiio to communicate remotely to that same target from a host Linux, Windows or MAC over USB or Ethernet or Serial. Although libiio was primarily developed by Analog Devices Inc., it is an active open source library, which many people have contributed to. It released under the GNU Lesser General Public License, version 2.1 or later, this open-source license allows anyone to use the library, on any vendors processor/FPGA/SoC, which may be controlling any vendors peripheral device (ADC, DAC, etc) either locally or remotely. This includes closed or open- source, commercial or non-commercial applications (subject to the LGPL license freedoms, obligations and restrictions).

12. Avahi-Architecture-Overview Avahi is a free zero-configuration networking (zeroconf) implementation, including a system for multicast DNS/DNS-SD service discovery. It is licensed under the GNU Lesser General Public License (LGPL). Avahi is a system which enables programs to publish and discover services and hosts running on a local network. For example, a user can plug a computer into a network and have Avahi automatically advertise the network services running on its machine. Avahi's "ihavA" advertisement results in adding user access to printers, files and other networked services.

13. SDR ADALM-PLUTO BOTTOM SIDE

14. SDR ADALM-PLUTO TOP SIDE

15. Smays USB 2.0 to OTG USB HUB to Ethernet RJ-45 LAN Network Adapter Combo RF Recordings 128GB Samsung FIT

16. Wideband LNA Specifications: Typical Voltage: +5V Typical Current: 90mA Gain: 18dB@0.9G Input/Output Impedance: 50Ω Max. Output Power: P1db 22dBm(@2GHz) Input Signal: +10dBm, output is distorted) Bandwidth 0.05-4GHZ(differs at different frequency, refers to S21 curve) Noise Factor: 0.6dB@0.9GHz Weight: 40g(approx.)

17. ZYNQ Z-7010

19. Alternate Form Factors/Extended Temp Range Ettus USRP E310 EPIQ SOLUTIONS Sidekiq TM Z2

21. * For the Sidekiq Z2 in small quantities individual cards are $3,500 for quantity 1-24.

22. C-BAND enhanced PA/LNA