1. Tube Heater, 3,000 Watt 240V Top + Back Front 1”Hole For Mixer Shaft
2”Insulated, 11Gauge-304 S.S.
Interior Strip Tank
16 guage-304 S.S., 2”Insulated,
Hinged Lid 28”Lx30”Front to Back
2” Exhaust
Tube Heater,
3,000 Watt 240V
Top
Parts Basket 24” inches deep x 24” inches long x 24” inches Front to Back, All Stainless Steel. Supported by 2” S.S. Angle Iron Welded to All Four Sides Of Interior Strip Tank.
26”
Inches
Process
Area
Depth
4” inches High Expanded Metal on the Front & Back sides of basket, 24 inches High Expanded Metal on Both Sides.
(Very Fine S.S. Screen in Bottom of Basket)
1”S.S. Drain
Pitched
Floor
4”inches
off floor
1” S.S. Drain + 4”
Inches
I.D.
26”Inches, Interior Tank Process Area
Back
2”Exhaust Fitting
1”Hole For
Mixer Shaft
Top View of
Interior Tank Bottom.
26”
Inches
~3” Heater Hole
Front
(Tank Exterior)
16 guage-304 S.S. Steel Exterior Tank Skin,
34“L x 30”Deep x 30” Front to Back, 2”insulated sidewalls (12/14/06)