Presentation is loading. Please wait.

Presentation is loading. Please wait.

Shafkat Anwar et al. BTS 2018;3:

Published byJules Samson Modified over 6 years ago

Similar presentations

Presentation on theme: "Shafkat Anwar et al. BTS 2018;3:"— Presentation transcript:

1 Shafkat Anwar et al. BTS 2018;3:294-312
3D Printing Technologies ABS = acrylonitrile butadiene styrene; CJP = color jet printing; Co = cobalt; Cr = chromium; DLP = direct light processing; FDM = fused deposition modeling; FFF = fused filament fabrication; HIPS = high impact polystyrene; Ni = nickel; PLA = polylactic acid; PVA = polyvinyl alcohol; SLA = stereolithography apparatus; SLM = selective laser melting; SLS = selective laser sintering; Ti = titanium; TPE = thermoplastic elastomer; TPU = thermoplastic urethane. Shafkat Anwar et al. BTS 2018;3: 2018 The Authors

Download ppt "Shafkat Anwar et al. BTS 2018;3:"

Similar presentations

Advanced Manufacturing Choices

Advanced Manufacturing Choices
Zacharie Lavigne COMP-1631 February 1, 2011

Zacharie Lavigne COMP-1631 February 1, 2011
3D Printing Fascination, Fast moving technology

3D Printing Fascination, Fast moving technology
Gary Coykendall National Resource Center for Materials Technology Education (MatEdU) www.materialseducation.org This work is part of a larger project funded.

Gary Coykendall National Resource Center for Materials Technology Education (MatEdU) This work is part of a larger project funded.
EML 2023 – Rapid Prototyping Lecture 1 – Additive Rapid Prototyping.

EML 2023 – Rapid Prototyping Lecture 1 – Additive Rapid Prototyping.
Introduction to Engineering Plastics. During this unit we will review: Classifications of Plastics, Characteristics of thermoplastics, Definitions of.

Introduction to Engineering Plastics. During this unit we will review: Classifications of Plastics, Characteristics of thermoplastics, Definitions of.
What is 3D Printing ? 3D Printing refers to a relatively new class of manufacturing methods which quickly produce physical prototypes from 3D CAD data.

What is 3D Printing ? 3D Printing refers to a relatively new class of manufacturing methods which quickly produce physical prototypes from 3D CAD data.
3D printing (Additive Manufacturing) AUTHOR: MALASHKOV VALENTIN.

3D printing (Additive Manufacturing) AUTHOR: MALASHKOV VALENTIN.
Additive Manufacturing

Additive Manufacturing
3D PRINTING At Stetson University. Introduction What is 3D printing Additive Manufacturing Opposed to subtractive process Patented in 1986 ~$20,000.

3D PRINTING At Stetson University. Introduction What is 3D printing Additive Manufacturing Opposed to subtractive process Patented in 1986 ~$20,000.
Fused deposition modeling, which is often referred to by its initials FDM, is a type of rapid prototyping or rapid manufacturing (RP) technology commonly.

Fused deposition modeling, which is often referred to by its initials FDM, is a type of rapid prototyping or rapid manufacturing (RP) technology commonly.
‘The process of joining materials to make objects from 3D model data. Usually layer upon layer as opposed to subtractive methodologies.’ 1 Additive Manufacturing.

‘The process of joining materials to make objects from 3D model data. Usually layer upon layer as opposed to subtractive methodologies.’ 1 Additive Manufacturing.
3D Printing: General Overview and the Hazards Associated with Them

3D Printing: General Overview and the Hazards Associated with Them
Scandium Sc. Titanium Ti Vanadium V Chromium Cr.

Scandium Sc. Titanium Ti Vanadium V Chromium Cr.
Design for 3D Printing. Cody Wilson -Arkansas.

Design for 3D Printing. Cody Wilson -Arkansas.
What in the SAMCRO Is 3D Printing?.

What in the SAMCRO Is 3D Printing?.
Sno-Camp Polymer Chemistry. Advantages of Polymers Ease of forming Recyclable Readily available raw material (crude oil) Low cost (most is less than $2.00.

Sno-Camp Polymer Chemistry. Advantages of Polymers Ease of forming Recyclable Readily available raw material (crude oil) Low cost (most is less than $2.00.
A Presentation by Dylan Lucas. A brief explanation of the creation and additive process.

A Presentation by Dylan Lucas. A brief explanation of the creation and additive process.
Yingcai Xiao 3D Printing. What and How Categories 3D Model Creation File Formats Printers Applications Services Challenges 3D Printing.

Yingcai Xiao 3D Printing. What and How Categories 3D Model Creation File Formats Printers Applications Services Challenges 3D Printing.
Statistical Analysis of the Tensile Properties of Various Polymers Processed through 3D Printing Introduction Additive Manufacturing is a new processing.

Statistical Analysis of the Tensile Properties of Various Polymers Processed through 3D Printing Introduction Additive Manufacturing is a new processing.

Similar presentations

Ads by Google