1. LATHE COMPONENT APPLICATIONS.

2. Introduction:
In this slide show we will look at how some previously considered
components are used within a lathe.
These components will be:
Screws / bolts
Bearings
Seals
Be on the lookout to see where these are & what methods are applied & why

3. Lathe Spindle

4. Lathe Spindle

5. Lathe Spindle

6. Machine Spindle

7. Lathe Driveshaft

10. Feed Gear Selector

11. Feed Gear Selector

12. Feed Direction Lever

14. Lathe Head Stock

15. Gland Packing Seal
There are no applications of this found on a lathe, so we will need to think about situations regarding an industrial valve These valves can be found in any industrial situation, with many extremes being experienced.

16. Gate
Valve

17. Packing Material & Form Types
Material - Plastic
Material – PTFE
Material – Aluminium
Material – Graphite
Material - Yarn
Form - Plaited
Form - Braided
Form - Twisted
Yarn packings can be based on vegetable, animal or synthetic fibres and are based on various types of fibre:

18. References:
design /