1. May 2010
Project: IEEE P Working Group for Wireless Personal Area Networks (WPANs)
Submission Title: [Proposed Resolution To The FCC Part MHz Band]
Date Submitted: [ 18 May, 2010]
Source: [Khanh Tuan Le] Company [Texas Instruments]
[Mark Wilbur] Company [Aclara]
Address []
Re: []
Abstract: [Proposed Resolution To The FCC Part MHz Band.]
Purpose: [Technical proposal. Presented to the g SUN Task Group for consideration.]
Notice: This document has been prepared to assist the IEEE P It is offered as a basis for discussion and is not binding on the contributing individual(s) or organization(s). The material in this document is subject to change in form and content after further study. The contributor(s) reserve(s) the right to add, amend or withdraw material contained herein.
Release: The contributor acknowledges and accepts that this contribution becomes the property of IEEE and may be made publicly available by P
Mark (Aclara), Khanh (TI)

2. Proposed Resolution To The FCC Part 90 450-470 MHz Band
May 2010
Proposed Resolution To The FCC Part MHz Band
18th May 2010
Mark Wilbur (Aclara)
Khanh Tuan Le (TI)
Mark (Aclara), Khanh (TI)

3. doc.: IEEE 802.15-<doc#>
<month year>
doc.: IEEE <doc#>
May 2010
Proposed Resolution
This proposed resolution addresses the comments #277, #285, #345, #347, #358 and #359:
Replace the definition of the MHz in Table 1a in P g/d1, March 2010 with the following definition:
Table 1a—MR-FSK modulation and channel parameters
Frequency Band (MHz)
Parameter
Mandatory
PHY mode #1*
PHY mode #2**
Optional
PHY mode #1
450–470
(FCC Part 22/90)
Data rate (kb/s)
4.8
9.6
n/a
Modulation
GFSK
4-GFSK
Modulation index
1.0
0.3
Channel spacing (kHz)
12.5
* Mandatory PHY mode 1 allowed per FCC (j)(8)
** Mandatory PHY mode 2 will be used when it is necessary to meet FCC (j)(3)
Mark (Aclara), Khanh (TI)
<author>, <company>

4. Thank you! <month year> doc.: IEEE 802.15-<doc#> May 2010
Slide 4
Mark (Aclara), Khanh (TI)
Page 4
<author>, <company>