1. Picture of the plant Name of the plant (City, Country)
Factsheet
SYSTEMIC Associated Plant
Name of the plant (City, Country)
A short introduction
Table 1. Technical information of the biogas plant
Characterisation the region your plant is located (manure surplus region, a lot of/few agro industry, which crops are )
How it all started…
Date of construction ….
Size (MWel)
Volume digesters (m3)
Digester type
Mesophilic/thermophilic digestion
Picture of the plant
Feedstocks
The digesters are fed with:
X % manure (pig/cattle/…)
Supplied by….
X % organic biological waste
X% food waste
X% …
Supplied by…. (from how far?)
Table 2. Origin of feedstock
Type
Mass per year
Manre
… ktonnes …
…ktonnes
Total
Biogas production
The biogas production is estimated on … m³ per year. This is converted in a CHP to electricity and heat?
How much electricity is used on site and how much goes to the grid?
Is the heat re-used? If so, for what?
Table 3. Yearly biogas production and average composition
Component
Estimation
CH4 (%)
CO2(%)
H2S (ppm)
O2 (%)
Total biogas production (Mm3)
Biogas per tonne of feedstock (m3/t)
Logo of the company
The H2020 EU-project SYSTEMIC (Systemic large scale eco-innovation to advance circular economy and mineral recovery from organic waste in Europe) receives funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation under Grant Agreement no

2. Name of the plant (City, Country)
Factsheet
SYSTEMIC Associated Plant
Name of the plant (City, Country)
Current process and disposal routes for end products
Describe process from feedstock to end products.
For example, if there is a separator describe how much liquid fraction and solid fraction is produced and what happens with them afterwards.
Describe is polymer or coagulants or other chemicals are added.
Describe where the N, P, K and organic matter and water goes to.
Table 4. Estimated composition of the recovered products – this is an example, complete the table for your own by-products and end products
Manure
Mass (kton/year)
Dry matter (%)
N- total (g/kg)
P-total (g/kg)
K2O-total (g/kg)
Pig slurry
Solid fraction after screw press
Liquid fraction after screw press
Digestate
Liquid fraction after centrifuge
NH3 water
AmmS-solution
AmmS-urea-solution
K-humin water
Solid fraction
Ashes
Current drivers for Nutrient Recovery and Reuse (NRR) Technologies and goals
Why would you be interested in nutrient recovery from digestate?
In which techniques would you be interested?
Which end products would be interesting to produce? (struvite, ammonium solution, ammonium nitrate solution, ammonium sulphate solution, Ca-phosphate salts, mineral concentrates, dischargeable water,…)
Motivation to join SYSTEMIC
What do you expect from SYSTEMIC
Logo of the company
The H2020 EU-project SYSTEMIC (Systemic large scale eco-innovation to advance circular economy and mineral recovery from organic waste in Europe) receives funding from the European Union’s Horizon 2020 Framework Programme for Research and Innovation under Grant Agreement no