1. Presenter: Peachanok Lertkajornkitti
Doodle Drive
Team 6

2. Abstract Android application as controller
Robot vehicle with microcontroller
Paths will be drawn in Android application and the vehicle will follow that path
Outdoor mode with GPS, Google Maps, Compass
Indoor mode with simple steering wheel

3. Packaging constraints
The vehicle should be durable and able to move on rugged terrains.
Wheels
Chassis –large enough to fit the components (GPS, compass etc)
Portable
Rechargeable battery with on-board charging
Fuel gauge
User-friendly and simple GUI on the Android
Simple steering wheel (Indoor Mode)
Google Maps (Outdoor Mode)
On-screen vehicle battery level
Toggle switch between Indoor and Outdoor Mode

4. Similarity with other products
I-Racer
Doodle Drive
Components
Bluetooth
Bluetooth, compass, ultrasonic sensors and GPS
Wheels
4 small wheels suitable for flat terrain
4 large wheels suitable for rugged terrain
Size
227 x 146 x 87 mm
342 x 273 x 120 mm
Power Management
USB On-Board charging
On-Board charging
Platform
Simple w/ PCB mounted on top
-we chose to base our packaging design on the I-Racer. This is because the I-Racer is a simple platform with the PCB board mounted on top. It also has four wheels instead of 2 wheels with a caster wheel. However, our vehicle will be a little larger and should be able to run better on rugged terrains. The wheels shown in the picture is not the ones we’re actually using. Also, the I-Racer has a plastic cover over the platform, which will be a little difficult for our vehicle since we have the ultrasonic sensors.

5. Illustration of the packaging