1. Master Terafan Greydragon’s Bench design
36”
3 3/16”
18”
30.25”
2.5”
3.5”
1.5” round hole
31.5”
10o
7.5”
All measurements based on 5/4” thick wood
Standard 1x12 is too thin (really only 3/4” thick)
Cross brace is a standard 2x4
Brace pegs can be cut from 1.5” dowel

2. Terafan’s bench design - page II
36”
12” 2”
3 3/16” 2”
The “extra” lines are an attempt to
show the results of the 10o angle.
The holes must be cut with the
10o angle taken in account.
The top and bottom of the legs must
have the 10o angle taken in account. 2” 2”
12”
2.5”