1. Setting Up CITRIX For HQ ACPERS BOA
Any Version of Citrix Version 4 or Above Will Work

2. THIS MIGHT BE YOUR FIRST ICON… CLICK IT

3. OR ...THIS MIGHT BE YOUR FIRST ICON… CLICK IT

4. Click Add ICA Connection

5. SELECT WIDE AREA NETWORK

6. DROP THIS DOWN AND YOU WANT WIDE AREA NETWORK… WAN

7. Check Published Applications

8. Click this to make sure
TCP/IP is showing

9. Don’t worry about this box after
you configure… this box will
auto populate

10. Click server location

11. Uncheck this

12. Once use default is unchecked then it looks like this

13. Make sure TCP/IP is clicked down

14. Then click add

15. Now add the IP addresses one at a time

16. IP Addresses
IP addresses

17. Delete the old addresses if there are any

18. Click this down and you’ll see 3 categories
to add your IP addresses. If you don’t use these categories the application will still work but you will need to add IP s to the primary

19. Click primary and then add

21. Enter the IP address
then click ok

22. After you add primary IP, add click down to add back up
IP addresses

23. Click add and then add the next IP addresses click ok then click add again for backup 1 and 2 and add the remaining IP addresses

24. After you enter your last IP addresses click ok… then
Click the Firewalls Button

25. Click on the Firewalls Button
Click on the Firewalls Button.. Click on Alternate Firewall connection, then OK

26. Your screen now looks like this after you enter all the IP s and clicked ok
make sure TCP/IP is showing
if it is not showing you will not connect
If you have not connected, repeat the process. If that doesn’t work contact IM and have them
check for local firewall issues

27. Drop this down until HQ Business Objects Shows
and select it

28. After you select the application the description auto populates
Click next

29. This is fine
Click next

30. Uncheck use default

31. Then drag down to the bottom selection and choose 128 bit and then click next

32. Nothing to do… click next

33. Hurray!!!!!!!!!!!!!!!!
Click finish

34. This is automatically added to your Citrix Neighborhood

35. YOUR PROPERTIES WILL LOOK LIKE THIS

36. YOUR SETTINGS WILL LOOK LIKE THIS

37. Double click this to open up Business Objects

38. This is as far as you can go without
the HQ BOA Password

39. After you get your passwords enter
the first set here

40. Which gets you to BOA itself
login here with your BOA password

41. You must use your password twice … once for NT once for BOA …
You must use your password twice … once for NT once for BOA …. the passwords from one box do not automatically roll over to the other box because the NT box has more on it than just HQ BOA

42. When you log in you must login into NT (the server) and BOA (the application) each time. When you reset your password on one box this does not automatically mean that the password on the other box has been automatically reset

43. When you get this… you are in HQ ACPERS BOA

44. A few extra tidbits
Look at your status bar and
You’ll see an icon

45. This is the ICA connection
And tells you if you’re connected .. Double click it

46. This shows that you have connected and what you have connected to

47. You can use this icon to
get out of BOA when the application proves to be …… stubborn
Once you are in the application the ICA show which application
Your are connected to and which server