1. Flow chart A,B x % shall be discussed. Less than 4%.
Flow A: Criteria pollutant test with emission worst case
Flow B: CO2 and Fuel consumption test for TVH and TVL (with Predominant mode or Best and worst case mode)
* All emission results must comply with the criteria pollutant emission standards.
Test 1*
EMW
Test 1
EMW : typically tested by TVH with emission worst case driver selectable mode
R1 < Declared value + x %
Yes
Use declared value
REMW1 > L
Rejected
Yes No No
x % shall be discussed.
Less than 4%.
Test 2*
Test 2* : accept Vehicle_H (or L) test
REMW1 > 0.9 L
Yes
EMW
Test 2 *
(R1+R2)/2 < Declared value + x %
Yes No No
REMW2 > L
Yes
Use average of three results
(R1+R2+R3)/3
Test 3*
Accepted No
CO2 FC R1
CO2R1
FCR1 R2
CO2R2
FCR2 R3
CO2R3
FCR3
TVH or TVL
TVHCO2 or TVLCO2
="Declared value"  or "(R1+R2+R3)/3"
TVHFC or TVLFC
= "Declared value"  or "(R1+R2+R3)/3"
TVInd
Combined app. (TVHCO2, TVLCO2)
Combined app. (TVHFC, TVLFC)
Pollutant (i)
REMW1
PEMW1(i)
REMW2
PEMW2(i)
Result
Average (PEMW1(i), PEMW2(i))

2. Flow chart C 0 % tolerance for Range and EC.
Flow C: Range and EC test for TVH and TVL
Test 1*
* All emission results must comply with the criteria pollutant emission standards.
R1 < Declared value + 0 %
Yes
Use declared value No
0 % tolerance for Range and EC.
Test 2*
(R1+R2)/2 < Declared value + 0 %
Yes No
Use average of three results
(R1+R2+R3)/3
Test 3*
Range EC R1
RangeR1
ECR1 R2
RangeR2
ECR2 R3
RangeR3
ECR3
TVH or TVL
TVHRange or TVLRange
="Declared value"  or "(R1+R2+R3)/3"
TVHEC or TVLEC
= "Declared value"  or "(R1+R2+R3)/3"
TVInd
Combined app. (TVHRange, TVLRange )
Combined app. (TVHEC, TVLEC)

3. Judgment and results Corrected by approved cycle value EM ● CO2
Flow chart without declared value
Flow chart with declared value
Test results
Corrected by approved cycle value EM ●
CO2
FC-combined
FC-each phase －
EC-combined
EC-each phase
Range-combined
Range-each phase