1. Technician Licensing Class
Electrical principles, math for electronics, electronic principles, Ohm’s Law
T5A - T5D
Valid July 1, 2014 Through June 30, 2018
Developed by Bob Bytheway, K3DIO, and slightly modified by SPARC 1

2. T 5 A
The name for the flow of electrons in an electric circuit is current. T5A03
Electrical current is measured in amperes. T5A01
The basic unit of electromotive force is voltage. T5A11
The electrical term for the electromotive force (EMF) that causes electron flow is voltage. T5A05 2

3. T 5 A
The term that describes the rate at which electrical energy is used is called Power. T5A10
The basic unit of electrical power is measured in Watts. T5A02 3

4. T 5 A
The name for a current that flows only in one direction is called direct current. T5A04
A mobile transceiver usually requires 12 volts. T5A06
Motor cycle battery
AAA battery
9 Volt battery
Hand held battery 4

5. T 5 A
The name for a current that reverses direction on a regular basis is alternating current. T5A09
Frequency is the term to describe the number of times per second that an alternating current reverses direction. T5A12
The unit of frequency is the Hertz. T5C05 5

6. T 5 A Copper is a good electrical conductor. T5A07
A good electrical insulator is glass. T5A08

7. T 5 B
Number prefixes
1,000,000,000,000
1,000,000,000
1,000,000
1,000 1
0.1
0.01
0.001
Unit

8. T 5 B 1.5 amperes is the same as: 1,500 milliamperes. T5B01
Another way to specify a radio signal frequency of 1,500,000 hertz is:
There are one thousand volts in:
One one-millionth of a volt is equal to:
1,500 milliamperes. T5B01
1500 kHz T5B02
One Kilovolt T5B03
one microvolt T5B04 8

9. T 5 B 500 milliwatts is equivalent to: 0.5 watts. T5B05
If an ammeter calibrated in amperes is used to measure a 3000-milliampere current, the reading would show:
A frequency readout calibrated in megahertz shows a reading of MHz, if calibrated in kilohertz it would show:
1,000,000 picofarads is the same as:
0.5 watts. T5B05
3 amperes T5B06
3525 kHz T5B07
1 microfard T5B08 9

10. T 5 B 28,400 kHz is equal to: 28.400MHz T5B12
If a frequency readout shows a reading of 2425 MHz, it can be read as:
28.400MHz T5B12
GHz T5B13 10

11. T 5 B
Power Radio 11

12. T 5 B
The approximate amount of change, measured in decibels (dB), of a power increase from 20 watts to 200 watts is 10 dB. T5B11
3 dB is the approximate amount of change, measured in decibels (dB) of a power increase from 5 watts to 10 watts. T5B09
The approximate amount of change, measured in decibels (dB) of a power decrease from 12 watts to 3 watts is -6 dB. T5B10 12

13. T 5 C
The ability to store energy in an electric field is called capacitance. T5C01
The basic unit of capacitance is the farad. T5C02
The ability to store energy in a magnetic field is called Inductance. T5C03
The basic unit of inductance is the henry. T5C04 13

14. T 5 C
The abbreviation “RF” refers to radio frequency signals of all types. T5C06
The usual name for Electromagnetic waves that travel through space are radio waves. T5C07 14

15. T 5 C
The formula used to calculate electrical power in a DC circuit is Power (P) equals voltage (E) multiplied by current (I). T5C08 15 15

16. T 5 C
The power being used in a circuit when the applied voltage is 13.8 volts DC and the current is 10 amperes is: T5C09
Solving for “P” so cover up the P and plug in the other two numbers
E is given as 13.8 volts and I is given as 10 amperes
The power being used in a circuit when the applied voltage is 13.8 volts DC and the current is 10 amperes is: T5C09
P = I x E
P = 10 x 13.8
P = 138 Watts

17. T 5 C
The power being used in a circuit when the applied voltage is 12 volts DC and the current is 2.5 amperes is:T5C10
Solving for “P” so cover up the “P” and plug in the other two numbers
E is given as 12 volts and I is given as 2.5 amperes
P = I x E
P = 2.5 x 12
P = 30 watts

18. T 5 C
The amount of current flowing in a circuit when the power in a circuit is 120 watts and the applied voltage is 12 volts is:T5C11
Solving for “I” so cover up the “I” and plug in the other two numbers
P is given as 120 watts and E is given as 12 volts and
I = P / E
I = 120  12
I = 10 Amperes 18

19. T 5 C
Impedance is a measure of the opposition to AC current flow in a circuit. T5C12
The unit of impedance is the ohm. T5C13 19

20. T 5 D
The formula used to calculate current in a circuit is Current (I) equals Voltage (E) divided by Resistance (R). T5D01 20 20

21. T 5 D
This formula us used to calculate voltage in a circuit: Voltage (E) equals Current (I) multiplied by Resistance (R). T5D02 21

22. T 5 D
This formula us used to calculate resistance in a circuit: Resistance (R) equals Voltage (E) divided by Current (I).T5D03 22 22

23. T 5 D
The resistance of a circuit in which a current of 3 amperes flows thru a resistor connected to 90 volts is: T5D04
R = E / I
R = 90  3
R = 30 Ohms 23 23

24. T 5 D
The resistance of a circuit in which the applied voltage is 12 volts and the current flow is 1.5 amperes is: T5D05
R = E / I
R = 12  1.5
R = 8 Ohms 24 24

25. T 5 D
The resistance of a circuit that draws 4 amperes from a 12-volt source is: T5D06
R = E / I
R = 12  4
R = 3 Ohms 25 25

26. T 5 D
The current flowing thru a 80-ohm resistor connected across 120 volts is: T5D07
I = E / R
I = 120  80
I = 1.5 Amperes 26 26

27. T 5 D
The current flowing thru a 100-ohm resistor connected across 200 volts is: T5D08
I = E / R
I = 200  100
I = 2 Amperes 27 27

28. T 5 D
The current flowing thru a 24-ohm resistor connected across 240 volts is: T5D09
I = E / R
I = 240  24
I = 10 Amperes 28 28

29. T 5 D
The voltage across a 2-ohm resistor if a current of 0.5 amperes flows thru it is:T5D10
E = I x R
E = 0.5 x 2
E = 1 Volt 29 29

30. T 5 D
The voltage across a 10-ohm resistor if a current of 1 amperes flows thru it is: T5D11
E = I x R
E = 1.0 x 10
E = 10 Volts 30 30

31. T 5 D
The voltage across a 10-ohm resistor if a current of 2 amperes flows thru it is: T5D12
E = I x R
E = 2.0 x 10
E = 20 Volts 31 31

32. Ohms Law Wheel 32

33. Element 2 Technician Class Question Pool
T 5 A – T 5 D
Valid July 1, 2014
Through
June 30, 2018 33

34. T5A01 Electrical current is measured in which of the following units?
Volts
Watts
Ohms
Amperes 34

35. T5A02 Electrical power is measured in which of the following units?
Volts
Watts
Ohms
Amperes 35

36. T5A03. What is the name for the flow of electrons in
T5A03 What is the name for the flow of electrons in an electric circuit?
Voltage
Resistance
Capacitance
Current 36

37. T5A04 What is the name for a current that flows only in one direction?
Alternating current
Direct current
Normal current
Smooth current 37

38. T5A05. What is the electrical term for the electromotive
T5A05 What is the electrical term for the electromotive force (EMF) that causes electron flow?
Voltage
Ampere-hours
Capacitance
Inductance 38

39. T5A06 How much voltage does a mobile transceiver usually require?
About 12 volts
About 30 volts
About 120 volts
About 240 volts 39

40. T5A07 Which of the following is a good electrical conductor?
Glass
Wood
Copper
Rubber 40

41. T5A08 Which of the following is a good electrical insulator?
Copper
Glass
Aluminum
Mercury 41

42. T5A09. What is the name for a current that reverses
T5A09 What is the name for a current that reverses direction on a regular basis?
Alternating current
Direct current
Circular current
Vertical current 42

43. T5A10. Which term describes the rate at which electrical
T5A10 Which term describes the rate at which electrical energy is used?
Resistance
Current
Power
Voltage 43

44. T5A11 What is the basic unit of electromotive force?
The volt
The watt
The ampere
The ohm 44

45. T5A12. What term describes the number of times per
T5A12 What term describes the number of times per second that an alternating current reverses direction?
Pulse rate
Speed
Wavelength
Frequency 45

46. T5B01 How many milliamperes is 1.5 amperes?46

47. T5B02. What is another way to specify a radio
T5B02 What is another way to specify a radio signal frequency of 1,500,000 hertz?
1500 kHz
1500 MHz
15 GHz
150 kHz 47

48. T5B03 How many volts are equal to one kilovolt?
One one-thousandth of a volt
One hundred volts
One thousand volts
One million volts 48

49. T5B04 How many volts are equal to one microvolt?
One one-millionth of a volt
One million volts
One thousand kilovolts
One one-thousandth of a volt 49

50. T5B05 Which of the following is equivalent to 500 milliwatts?

51. T5B06. If an ammeter calibrated in amperes is used to
T5B06 If an ammeter calibrated in amperes is used to measure a 3000-milliampere current, what reading would it show?
0.003 amperes
0.3 amperes
3 amperes
3,000,000 amperes 51

52. T5B07. If a frequency readout calibrated in megahertz shows
T5B07 If a frequency readout calibrated in megahertz shows a reading of MHz, what would it show if it were calibrated in kilohertz?
kHz
35.25 kHz
3525 kHz
3,525,000 kHz 52

53. T5B08 How many microfarads are 1,000,000 picofarads?53

54. T5B09. What is the approximate amount of change,
T5B09 What is the approximate amount of change, measured in decibels (dB), of a power increase from 5 watts to 10 watts?
2 dB
3 dB
5 dB
10 dB 54

55. T5B10. What is the approximate amount of change,
T5B10 What is the approximate amount of change, measured in decibels (dB), of a power decrease from 12 watts to 3 watts?
-1 dB
-3 dB
-6 dB
-9 dB 55

56. T5B11. What is the approximate amount of change,
T5B11 What is the approximate amount of change, measured in decibels (dB), of a power increase from 20 watts to 200 watts?
10 dB
12 dB
18 dB
28 dB 56

57. T5B12 Which of the following frequencies is equal to 28,400 kHz?
MHz
2.800 MHz
MHz
kHz 57

58. T5B13. If a frequency readout shows a reading of 2425
T5B13 If a frequency readout shows a reading of MHz, what frequency is that in GHz?
GHz
24.25 GHz
2.425 GHz
2425 GHz 58

59. T5C01 What is the ability to store energy in an electric field called?
Inductance
Resistance
Tolerance
Capacitance 59

60. T5C01 What is the ability to store energy in an electric field called?
Inductance
Resistance
Tolerance
Capacitance 60

61. T5C03 What is the ability to store energy in a magnetic field called?
Admittance
Capacitance
Resistance
Inductance 61

62. T5C04 What is the basic unit of inductance?
The coulomb
The farad
The henry
The ohm 62

63. T5C05 What is the unit of frequency?
Hertz
Henry
Farad
Tesla 63

64. T5C06 What does the abbreviation “RF” refer to?
Radio frequency signals of all types
The resonant frequency of a tuned circuit
The real frequency transmitted as opposed to the apparent frequency
Reflective force in antenna transmission lines 64

65. T5C07. What is a usual name for electromagnetic waves
T5C07 What is a usual name for electromagnetic waves that travel through space?
Gravity waves
Sound waves
Radio waves
Pressure waves 65

66. T5C08. What is the formula used to calculate
T5C08 What is the formula used to calculate electrical power in a DC circuit?
Power (P) equals voltage (E) multiplied by current (I)
Power (P) equals voltage (E) divided by current (I)
Power (P) equals voltage (E) minus current (I)
Power (P) equals voltage (E) plus current (I) 66

67. T5C09. How much power is being used in a circuit when
T5C09 How much power is being used in a circuit when the applied voltage is 13.8 volts DC and the current is 10 amperes?
138 watts
0.7 watts
23.8 watts
3.8 watts 67

68. T5C10. How much power is being used in a circuit when
T5C10 How much power is being used in a circuit when the applied voltage is 12 volts DC and the current is 2.5 amperes?
4.8 watts
30 watts
14.5 watts
0.208 watts 68

69. T5C11. How many amperes are flowing in a circuit when
T5C11 How many amperes are flowing in a circuit when the applied voltage is 12 volts DC and the load is watts?
0.1 amperes
10 amperes
12 amperes
132 amperes 69

70. T5C12 What is meant by the term impedance?
It is a measure of the opposition to AC current flow in a circuit
It is the inverse of resistance
It is a measure of the Q or Quality Factor of a component
It is a measure of the power handling capability of a component 70

71. T5C13 What are the units of impedance?
Volts
Amperes
Coulombs
Ohms 71

72. T5D01 What formula is used to calculate current in a circuit?
Current (I) equals voltage (E) multiplied by resistance (R)
Current (I) equals voltage (E) divided by resistance (R)
Current (I) equals voltage (E) added to resistance (R)
Current (I) equals voltage (E) minus resistance (R) 72

73. T5D02 What formula is used to calculate voltage in a circuit?
Voltage (E) equals current (I) multiplied by resistance (R)
Voltage (E) equals current (I) divided by resistance (R)
Voltage (E) equals current (I) added to resistance (R)
Voltage (E) equals current (I) minus resistance (R) 73

74. T5D03 What formula is used to calculate resistance in a circuit?
Resistance (R) equals voltage (E) multiplied by current (I)
Resistance (R) equals voltage (E) divided by current (I)
Resistance (R) equals voltage (E) added to current (I)
Resistance (R) equals voltage (E) minus current (I) 74

75. T5D04. What is the resistance of a circuit in which a
T5D04 What is the resistance of a circuit in which a current of 3 amperes flows through a resistor connected to 90 volts?
3 ohms
30 ohms
93 ohms
270 ohms 75

76. T5D05. What is the resistance in a circuit for which the
T5D05 What is the resistance in a circuit for which the applied voltage is 12 volts and the current flow is amperes?
18 ohms
0.125 ohms
8 ohms
13.5 ohms 76

77. T5D06. What is the resistance of a circuit that. draws 4
T5D06 What is the resistance of a circuit that draws 4 amperes from a 12-volt source?
3 ohms
16 ohms
48 ohms
8 ohms 77

78. T5D07. What is the current flow in a circuit with an
T5D07 What is the current flow in a circuit with an applied voltage of 120 volts and a resistance of 80 ohms?
9600 amperes
200 amperes
0.667 amperes
1.5 amperes 78

79. T5D08. What is the current flowing through a 100-ohm
T5D08 What is the current flowing through a 100-ohm resistor connected across 200 volts?
20,000 amperes
0.5 amperes
2 amperes
100 amperes 79

80. T5D09. What is the current flowing through a 24-ohm
T5D09 What is the current flowing through a 24-ohm resistor connected across 240 volts?
24,000 amperes
0.1 amperes
10 amperes
216 amperes 80

81. T5D10. What is the voltage across a 2-ohm resistor if a. current of 0
T5D10 What is the voltage across a 2-ohm resistor if a current of 0.5 amperes flows through it?
1 volt
0.25 volts
2.5 volts
1.5 volts 81

82. T5D11. What is the voltage across a 10-ohm resistor if a
T5D11 What is the voltage across a 10-ohm resistor if a current of 1 ampere flows through it?
1 volt
10 volts
11 volts
9 volts 82

83. T5D12. What is the voltage across a 10-ohm resistor if a
T5D12 What is the voltage across a 10-ohm resistor if a current of 2 amperes flows through it?
8 volts
0.2 volts
12 volts
20 volts 83