1. After 3.2
Revised

2. Which item is an exterior gateway protocol?
RIP
IGRP
EIGRP
OSPF
BGP
1 of 6

3. Which protocol is obsolete?
RIP
IGRP
EIGRP
OSPF
BGP
2 of 6

4. Which type of protocol is used to route packets between different autonomous systems?
Distance vector interior routing protocol
Link-state interior routing protocol
Static routing
Path vector exterior routing protocol
None of the above
3 of 6

5. Which type of protocol uses only next hop and distance metrics, not complete information about network topology?
Distance vector interior routing protocol
Link-state interior routing protocol
Static routing
Path vector exterior routing protocol
None of the above
4 of 6

6. Which type of protocol does not include the subnet mask in routing table updates?
Distance vector interior routing protocol
Link-state interior routing protocol
Classless routing protocol
Classful routing protocol
None of the above
5 of 6

7. What dynamic routing protocols can properly route this network?
All routing protocols
All interior routing protocols
All classful interior routing protocols
All classless interior routing protocols
None of the above
Q 6 of 6

8. After 3.4

9. What is the source of this router's path to the 192.168.120.0 network?
RIP
OSPF
EIGRP
Static route
Something else

10. Memorize These
Connected
Static 1
EIGRP (Internal) 90
OSPF
110
RIP
120

11. Directly connected route More than one route will be used
R2 has three sources of routing information to the network: A static route configured by an administrator RIP updates Directly connected route All routes use default Administrative Distances. Which route will be used?
Static route
RIP route
Directly connected route
More than one route will be used
The question cannot be answered from this information

12. What metric does RIP use?
Number of hops
Bandwidth
Delay
More than one of the above
None of the above

13. What metric does EIGRP use?
Number of hops
Bandwidth
Delay
More than one of the above
None of the above