1. William E. Connor & Associates Ltd.
Welcome
William E. Connor & Associates Ltd.
2012
12/1/2018

2. TJX INHOUSE DROPTEST
ISTA 1A Modified

3. Which items need to conduct in-house drop-test ?
Mirror.
Picture frame.
Lacquer wares.
Glassware
Furniture
Note: For Tkmaxx, Drop-test is not apply. If incase tag on order, Will follow main branch standard.

4. Drop-test requirement
Both inner and master carton must conduct Drop-test ISTA 1AM (TJX).

5. Drop-test ISTA 1AM (TJX) Standard
The drop test consists of a ‘10 free fall drop sequence test’ from heights that vary with weight as follows:
Weight equal or greater than (Kg)
But Less Than (Kg)
Drop Height (cm)
Free fall 28 46 45 31
--- 20

6. TJX require that the same drop test be done on all Store Ready inner cartons. TJX feel this is important because the Store Ready inners get unpacked from their master cartons in TJX DC's and then travel by truck to stores. If TJX experience damages as a result of these changes TJX will revert to the 30" drop test requirement on lighter product for any vendors that we receive damaged product from.

7. Critical Conner

8. The test must be performed in following order: a
The test must be performed in following order: a. Most fragile corner, if not known, at the carton manufacturer's joint b. Shortest edge radiating from that corner c. Medium edge radiating from that corner d. Longest edge radiating from that corner e. Flat on one of the smallest faces f. Flat on the opposite small face g. Flat on one of the medium faces h. Flat on the opposite medium face i. Flat on one of the largest faces j. Flat on the opposite largest face a. b. c. d. e. f. g. h. i. j.

9. Drop
When performing in-house drop test, be sure the total weight of product is concentrated on to the drop Conner/edge/face. Self balancing before leaving up.

10. Q&A
Thank You

11. 12/1/2018
2012 Jan Connor Overview JP 11 11 11 11