1. Sun Printed bag or pillow
Fall 2018

2. OBJECTIVE
Students will each receive a cut of white 100% Cotton fabric measured 18”x40”, which they will dye and design a sun printed surface from using found objects/plants.
They will then cut and sew their projects by following a step-by-step pattern.

3. CHOICES:
Tote Bag Drawstring Bag
Set of 2 Pillows

4. examples

10. CHECKLIST Sun Printing Sketch Due Tuesday 9-11-18
Sun Printing Vocabulary Due Tuesday
Sewing Practice Drawstring Bag Due Tuesday
Final Sun Printed Project Due Friday

11. STEP 1: MEASURE & CUT FABRIC
SET OF 2 PILLOWS MEASUREMENTS:
Four 10”x18” Pieces.
TOTE BAG MEASUREMENTS:
Two 12”x18” Pieces.
Two 4”x18” Pieces *OPTIONAL Extra 10”x18” piece for pockets*
DRAWSTRING BAG MEASUREMENTS:
Two 18”x20” Pieces.

12. STEP 2: Sun Printing Wet fabric and squeeze out all excess water.
Place Fabric FLAT in plastic tray.
Paint fabric dye on entire piece of fabric, only using 1 or 2 colors at a time.
Immediately place objects/stencils on fabric, making sure to press down to create as much contact as possible.
Place in Sun until completely dry.

13. STEP 3: SEWING
Each student will create a sewing practice small drawstring bag using a fat quarter and some ribbon.
After this, students will follow step-by-step directions on how to construct their chosen project.