1. Titrations
Unit 13 -Chemistry

2. Carry out this reaction using a TITRATION.
Acid-base titration is a process for calculating the concentration of a known volume of acid or base.
H2C2O4(aq) NaOH(aq) ---> Na2C2O4(aq) H2O(liq)
acid base
Carry out this reaction using a TITRATION.

3. Setup for titrating an acid with a base

4. Titration Video Let’s watch…

5. Sample Problem
In this sample titration, we are trying to determine the concentration of mL of HCl. In the titration we will be neutralizing the HCl with M NaOH.
Step 1: The NaOH, the titrant, is placed in the buret. The titrant is the solution of known concentration that is added from the buret.
Step 2: The HCl is placed in the Erlenmeyer flask along with approximately mL of distilled water and 2-3 drops of phenolphthalein indicator. Since the solution in the flask is acidic, phenolphthalein is colourless.

6. Step 3: NaOH is added to the HCl in the flask
Step 3: NaOH is added to the HCl in the flask. When the NaOH comes in contact with the solution in the flask, it turns pink and then the pink colour quickly disappears. This is because the OH- from the NaOH interact with the phenolphthalein to change the phenolphthalein from colourless to pink.
The solution becomes clear again as the hydronium ions from the hydrochloric acid neutralize the added hydroxide ions. As more NaOH is added, it takes longer for the pink colour to disappear. As it starts taking longer for the pink colour to disappear, the sodium hydroxide is added a drop at a time.

7. Acid-Base Titration

8. The equivalence point of the titration is reached when equal numbers of moles of hydronium and hydroxide ions have been reacted.
When this happens in this titration, the pH of the solution in the flask is 7.0 and the phenolphthalein indicator is colourless.
Step 4: Add as little excess NaOH as possible. We want to add a single drop of NaOH to the colourless solution in the flask and have the solution in the flask turn pink and stay pink while the contents of the flask are swirled.
This permanent colour change in the indicator is known as the endpoint of the titration and the titration is over.

9. Titration Curve

10. To Solve the problem 1st write the equation for the reaction:
HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
2nd use the equation:
MaVana = MbVbnb
where M = molarity
V = volume
n = number of moles (of H+ or OH-)
3rd Solve:
M1 ( L) ( 1) = (0.150M)( L) (1)
M1 = M

11. SAMPLE PROBLEM 2
In an acid-base titration, mL of M nitric acid, HNO3, were completely neutralized by mL of aluminium hydroxide, Al(OH)3. Calculate the concentration of the aluminium hydroxide.

12. SAMPLE ANSWER 2 Solve: (0.180M) (0.01745L) (1) = Mb(0.01476)(3)
The balanced equation for the reaction is:
3HNO3(aq) + Al(OH)3(aq) → Al(NO3)3(aq) + 3H2O(l)
Use the equation: MaVana = MbVbnb
Solve:
(0.180M) ( L) (1) = Mb( )(3)
Mb = M
LET’S PRACTICE….