1. Villa Graduation Project 2 Prepared By : Abdalla Naem Dwikat
An-Najah National University Faculty of Engineering Building Engineering Department
Graduation Project 2
Villa
Prepared By :
Abdalla Naem Dwikat
Project supervisor:
DR.Monther Dwikat

2. Outline: Project Definition Architectural Design Environmental Design.
Structural Design
Electrical Design
Mechanical Design
Safety Design

3. Site of the project: Location and Site: my project located in sarra, sarra Located to the southwest of the city of Nablus

4. Architectural Design

5. Site Plan :

6. Ground Floor (Area = 200 square meter)

7. First Floor (Area = 200 square meter)

8. North Elevation:

9. South Elevation:

10. East Elevation:

11. West Elevation:

12. Sections 1 :

13. Sections 2 :

14. Environmental design

15. Thermal Comfort
Heating and cooling load
water efficiency
Natural Lighting
Shading
Acoustics Comfort

16. Thermal Comfort : external wall layer's

17. Total Heating and Cooling Load we use split unit for heating and cooling

18. water efficiency: we separate the gray and black water

19. Natural Lighting

20. day light factor in the fig we can see the daylight factor in a gust bed room in the ground floor and we can see that the average value is 4.29% and that is good daylight factor and the distribution of the daylight is very good.

21. Shading

22. Shutters Design with 25 cm

23. Acoustics Comfort

24. Acoustics design for bed room
Area
Area*
Wall 42
0.3
12.6
Ceiling 27
0.04
1.08
Floor 21
0.03
0.64
Door
2.25
0.05
0.1125
Window
4.75
0.19
wood
1.9
0.07
0.133
curtains
12.4
0.58
7.192
Bed
3.22
0.30
0.93
Total
114.52
22.9
a average = RT60= , it is accepted .

25. STC Value:
52db
47db
external wall
internal wall

26. Structural Design

27. Model (concrete frame )
2 floor ,
All floor one way ribbed slab
Compatibility , equilibrium
Internal forces : ok

28. (concrete frame ) : slab design
25 cm one way ribbed slab
L.L = 3 KN/ m^2
Super D.L = 4KN / m^2

29. (concrete frame ) : beams, columns design
b * h b1
700*500 b2
600*300 b3
500*500 b4
400*500
Column
b *h C1
600*300 C2
500*300 C3
400*300

30. (concrete frame ) : beam details

31. (concrete frame ) : Footing Layout
Bearing capacity of soil = 300 KN/ m^2

32. (concrete frame ) :Footing Details

33. (concrete frame ) :shear wall Details

34. Electrical Design

35. Lighting design (artificial lighting ) : Luminaries Data
we used fluorescent lamps because of its ability to save power and they have long life cycle .

36. Lighting design (artificial lighting ) :Lighting Distribution to the ground floor

37. Lighting design (artificial lighting ) :socket Distribution to the ground floor

38. Lighting design (artificial lighting ) : switch Distribution to the ground floor

39. Power design : Circuit Breaker Plans
Total load = 4 kw
Total current = 5.93Am
Total load = 3.1kw
Total current = 5.48 Am

40. Mechanical Design

41. Water Supply System
Drainage system
AC System
Fire Place System
Fire System
Elevators System

42. Roof water Supply System:

43. Water supply system:

44. Draneg System:

45. Manhole system:

46. AC System:

47. Fire Place system:

48. Fire System: we use fire extinguisher

49. Elevators System