1. Stainless Steel Sinks hand sinks – scullery – utility

2. Eagle Hand Sinks with MICROGARD® Antimicrobial Protection
The Industry’s Clean Leader!
MICROGARD® is a second line of defense. In keeping with good hygiene practices, clean this product as usual.
MICROGARD® is an antimicrobial agent which contains built-in protection to retard the growth of a broad range of bacteria, mold and mildew that cause stains, odors and degradation.
The protection will not wash out, while organic bactericides may.
MICROGARD® is available as an option on most Eagle hand sinks.

3. Eagle Hand Sinks Over 40 Models!
Traditional: “the industry standard” –the HSA-10-F
Knee/Foot Operated: – Great for hospitals, “hands free” operation for less contamination.
With standard towel & soap dispenser: – Modeled after our Traditional Hand Sinks, but come standard with C-fold towel dispenser and soap dispenser
Electronic: – Sensor activated faucet conserves water; electronic “eye” soap dispenser minimizes cross contamination between soap and water dispenser.

4. Eagle Hand Sinks Over 40 Models!
Space Savers: –designed for maximum space efficiency – Only 12˝ from side to side.
With Factory Side Splashes: – Meets the latest health code requirements.
Physically Challenged: – Specially designed for unique applications.
With Waste Receptacle – Slides onto bottom of waste skirt, easy to clean and empty. Now patented design (#5,732, 422).

5. HFL-5000 – Touch Free Hand Washing System
The HFL-5000 was inspired by an industry request for a complete touch free system to improve sanitation.
The HFL-5000 sink bowl meets the most stringent HAACP requirements and contains built-in MICROGARD® ANTIMICROBIAL PROTECTION.
The system also includes an electronic eye faucet, nail brush & holder, towel dispenser, soap dispenser, hand sanitizer dispenser and glove box holder.

6. Lavatory Sinks with Marine Edge
All models feature a marine edge.
Standard with spout/faucet, soap dispenser and basket drain.
custom backsplash
wall mounted
wall mounted
knee valve operation
pedestal style
foot valve operation
pedestal style
shown with electronic-eye faucet

7. Mop Sink and Storage Cabinet
NEW
Mop sink is 304 stainless steel construction.
8˝ deep sink bowl with deep-drawn coved corners.
Drain included with flat strainer plate.
Accessories include mop holders, hose & bracket, and service faucet.
mop sink storage cabinet includes 12˝ wide center shelf, slanted top, vented sides, mop sink, service faucet and hose & bracket

8. Countertop Drop-In Self Rim Sinks
All models are furnished with drains in the center of the bowl.
Optional faucets available.
All sinks include: - clamping hardware - faucet holes on 4˝ centers - heavy gauge 304 stainless steel bowls -crumb cup strainer with 1½˝ outlet
Available in multiple sizes and compartments.

9. shown with optional faucet and detachable drain board
Utility Sinks
Basic functional sink for numerous applications.
Bowls are 13¼˝ deep with 14˝ water level.
8˝ backsplash.
Legs are 1⅝˝ diameter, galvanized tubing are located directly under sink bowls for maximum stability and weight support.
Available in multiple sizes and compartments.
shown with optional faucet and detachable drain board

10. 314 & 414 Series Coved Corner Sinks
Heavy gauge stainless steel bowls, drain boards and backsplash.
14˝ water level.
Legs cross braced front-to-back.
9½˝ backsplash.
2˝ wide ‘euro-style’ edging.
Available with or without drain boards.
Available in multiple sizes and compartments.
314 Series – Our Best
All heavy gauge type 304 construction.
414 Series –
Type 304 sink bowl with type 430 drain board(s) and backsplash.

11. 412 Series Coved Corner Sinks
10½˝ water level.
Type 430 stainless steel bowls, drain boards and backsplash.
Legs cross braced front-to-back.
9½˝ backsplash.
2˝ wide ‘euro-style’ edging.
Available with or without drain boards.
Available in multiple sizes and compartments.

12. 314 Series Corner Sinks Heavy gauge type 304 construction.
Features 1½˝ rolled rim on front and sides.
Two sets of faucet holes punched on 8˝ centers.
Legs cross braced front-to-back with high-impact corrosion resistant fully-adjustable bullet feet.
Leg locations are adjacent to sink bowls, providing increased stability and maximum weight support.
Unit comes standard with poly cutting board/sink covers.

13. FN Spec-Master® Series
14 gauge type 304 stainless steel construction.
14˝ water level and have 5/8˝ radius corners, both vertical and horizontal.
Legs cross braced front-to-back with high- impact corrosion resistant fully-adjustable bullet feet.
9½˝ backsplash and includes 1˝ upturn and tile edge.
Available in multiple sizes and 1-4 compartments.
available with or without drain boards

14. Spec-Master® FFN Series – Flush Front Sinks
Constructed of 14 gauge stainless steel.
14˝ water level and swirl-away drainage.
10˝ high backsplash with 1˝ downturn at rear.
Legs located directly under sink bowls for increased stability and cross braced front-to- back .
Adjustable stainless steel bullet feet.
All outside corners of assembly are bullnosed to provide safe, clean edges
available with two or three compartments
custom options and accessories available through our SpecFAB® division

15. Ship Fully Crated Eagle’s Coved Corner and FN sinks ship fully crated.
Our sinks are made to stock for immediate shipment.

16. Another Eagle Advantage –
Sink Accessories
Another Eagle Advantage –
Order sinks and all plumbing accessories together. 1 purchase order, 1 delivery = saved time and $$.
Complete line of accessories available: – Pre-rinse units – Faucets – Sink covers – Leg components – Mixing valves – Eye-wash units – Pedal valves – Towel dispensers – Soap dispensers – Plumbing and drains – Waste receptacles – Nail brush & holder

17. Custom Options Model # Description E30
End Splash – per end, all heights
E37
NSF sprayed-on latex sound deadening – up to 12’
E37A
-for each additional foot
E38-6
Cantilever mount up to 6’
E38-12
Cantilever mount up to 12’
E39
Enclosed back splash
E40
Provision for sink heater
E41
Disposal provision package – collar
E41A
Disposal provision package – cone
E43
Stand pipe with corner guard (only on FN & Utility sinks)
E44
Faucet hole revision (adding or moving)

18. Custom Options - continued
Model #
Description
E45
Trough installed in drainboard – up to 30˝ long
E46
Rubber scrap block installed
E47
-for each additional foot
E48
Stainless steel apron to cover sink bowls – 2 or 3 compartment
E48A
-for each additional compartment over 3
E49
S/S undershelf under drainboards – up to 24˝ w/short legs
E49A
-for each additional foot over 24˝
E50
Provision for water pump
E51
Optional size drainboard
E52
High backsplash up to 13˝
E53
High backsplash up to 18˝

19. Floor Drains & Troughs
Built-in pitch towards drain ensures complete drainage.
Stainless steel drain accommodates up to a 4˝ diameter pipe, and removable perforated stainless steel basket.
New Anti-Splash design assures complete drainage while preventing splashing back on the floor.
Troughs and drains come with subway-style stainless steel grating or fiberglass grating.
Custom sizes available.