Presentation is loading. Please wait.

Presentation is loading. Please wait.

Stand-By Emergency Lighting Inverter

Similar presentations


Presentation on theme: "Stand-By Emergency Lighting Inverter"— Presentation transcript:

1 Stand-By Emergency Lighting Inverter
Single Phase 350 W – 2000 W

2 What is the Cobra Mini? It is a single phase
Emergency Lighting Inverter which is a stand-by unit. It defends your environment against unwanted power outage and electrical disturbances. It continually maintains efficient (over 99%) AC Emergency Power to operate all emergency lighting fixtures at “full-light” output, providing Superior dependability and security to commercial/industrial environments in a small footprint. It is available in power levels of 350, 525, 700, 875, 1050, 1400 and 2000 Watts

3 Why is the Cobra Mini better?
With the increased environmental awareness and the increase in energy costs, what are you to do? With the Cobra technology you can reduce both energy cost and energy consumption. Cobra’s technology allows a much higher efficiency rating, consuming less power. Consuming less energy saves your money and the environment while keeping the same dependability you expect from DSPM.

4 What makes the Cobra Mini different?
• DSPM Watchdog software always on guard. • Dependable DSP/PWM technology for unsurpassed reliability. • Economical for the lowest overall cost for your light safety, with an Energy Star Rating. • Temperature compensating technology that controls batteries for the longest battery life. • Sealed maintenance free batteries. • Full light output for entire 90 minutes. • Self-diagnostics for a safe and secure lighted environment. • Pure sine wave output for all types of lamps. • ECM module is a patented technology used by DSPM. • Backup solutions for multiple applications such as: indoor and outdoor emergency lighting, exits, cash registers, computers, strategic electronics and more! • 10 Year pro-rated battery warranty • 5 Year power train warranty • Meets federal, state and local codes: UL924, NFPA 101, NFPA 70, NEC and OSHA.

5 Specifications *Standard Power Levels , 525, 700, 875, 1050, 1400 and 2000 Watts *Input Voltage , 208, 240 or 277 VAC *Input Voltage Range %, -15% *Output Voltage , 277, 120/240 or 120/277 VAC *Output Voltage Regulation......±3% for all loads and battery discharge mode *Output Frequency Range Hz, ±1% Output Wave Form Sine-wave 100% linear load Crest Factor :1 typical Input Protection Input Main Circuit Breaker Output Protection Output Main Circuit Breaker Surge Protection The unit will protect itself and the load against surges as defined in ANSI/EEE C62.45 category A and B Battery Sealed maintenance-free (AGM) lead calcium Recharge Current Conforms to UL924 standards External Battery Provision for hardware connection of external battery cabinets or DC source Efficiency ≥99% at 100% linear load Audible Noise <45dB measured on Response Curve “A” Safety Agencies Listed to UL standard 924 Operating Temperature º to 40ºC (32º to 104ºF) Storage Temperature º to 60ºC (-4º to 140ºF) Humidity %, Non-condensing Transfer Time msec – 60msec *Consult factory for others. Specifications subject to change without notice.

6 System Drawing: Specification Chart:

7 Brochure For your convenience you can download the brochure with all the information about our Cobra Mini from our website:

8 Data Sheet For your convenience you can download the data sheet with all the information along with how to order our Cobra Mini from our website:

9 Other Downloads For your convenience you can also download the technical specification, manual, field service documents, and white papers for the Cobra Mini from our website:

10 If you have any other questions or would like more information
Call DSPM.POWER Thank You!


Download ppt "Stand-By Emergency Lighting Inverter"

Similar presentations


Ads by Google