1. MGA 2018 RMIT, Melbourne, Australia 23 – 24 OCT 2018 Release: 1.0
Young Professionals & Student Forum Rapid Prototype Development (RPD) Challenge
MGA 2018
RMIT, Melbourne, Australia
23 – 24 OCT 2018
Release: 1.0

2. Young Professional & Students Forum (YP/S)
YP/S will be held in Two Sessions
Day 1: Kick-Off YP/S Forum Networking – Organized by LOC
Networking among the Industries and YP/S participants
Time 17:00 – 19:00
Place : (TBC)
Day 2: Rapid Prototype Development Challenge
Participants develop prototypes to address specific problems
Presentation before the banquet
Place: (TBC)
Schedule
1st Call : 8th OCT
Call for Participation – Students and Researcher
Call for Resource Persons/Mentors
If you want to participate in the RPD Challenge, please send an to by 13th OCT, Friday
Pre-discussions : Provide instructions on what to do & how to do
15th OCT : Online Meeting 19:00 – 21:00 JST
Address to Join Online Meeting :
RPD Challenge
24th OCT / Time: 14:00 – 18:00 Place: TBC

3. Rapid Prototype Development (RPD) Challenge
Objectives
Develop a prototype based on GNSS data to address a specific problem
Method
A team of 2 – 4 members
A group of mentors will advise the teams
Each team will be provided sample GNSS data
Data can also be logged with participant’s device
Few GNSS Receiver devices will be provided to log data
Preparatory Discussions will be held before MGA
See schedule, next slide
Prototype Development will be done on Day 2
Four hours
Team members are required to prepare necessary data, programs etc. before the event

4. Schedule Pre-MGA, Online MGA, RMIT
8th October
1st Announcement
15th October
Online meeting to finalize team members
Participants: Team Members and Mentors
Provide instructions for RPD Challenge
Provide Sample Data, Programs etc
Finalize Mentors
18th October
Each Team Participants discuss among themselves
Participants: Team Members only
23rd October
YP/S Forum Networking
Introduction of Team, Team Members and Mentors
24th October
Prototype Development in Team
4 hours
Presentation of prototype
10min each Team
RPD Evaluation
15th OCT : Online Meeting 19:00 – 21:00 JST
Address to Join Online Meeting :

5. Resource Persons LOC MGA Japan Schedule Other
RPD Challenge Coordinator
Day 2
Dinesh, Kohtake
24th OCT
Pre-MGA Webinars, Online Discussions etc
Resource Persons
Kohtake: Project Design
Dinesh: GNSS (Android Raw Data, RTKDroid, RTK GEO++, …)
Allison: Android Raw Data (TBC)
Kubo: GNSS (RTKLIB)
Many more to join
Evaluation
Shibasaki,
Time: TBD

6. Device Type and Data Type that can be provided to teams
Device Type and Data Type that can be provided to teams *Xiomi Mi8, u-blox F9 and MSJ L6 TBC
Data Type
GNSS Raw Data
L1/L5 Position Data
QZSS L1S Emergency Message
QZSS L6 Correction Data
IF Related Data
(Power Spectrum etc)
Device Type
Device or Receiver Type 1
Android Device
(OS 7.0 or above) 〇
L1 Only ☓ 2
Xiomi Mi8
Mobile Phone 3
MSJ L6 Receiver
MADOCA
CLAS 4
U-blox M8T/M8P (L1) ▽
L1S　MT 43/44 (TBC)
NF Values 5
U-blox F9 (L1/L2/L5) 6
Septentrio, M2a
(L1, L2, L5)

7. Software Tools OS Program Name Description Related Device Window
RTKLIB
RTK
Any receiver device with RINEX data
U-center
Log GNSS Raw Data
U-blox receiver
Android
RTKDroid
RTK in Android
u-blox M8T or M8P connected to android device by OTG cable
SW Maps
GIS Data Input
Android internal GPS, External GPS with BT or direct connection by OTG cable
Log GNSS Data
Internal GNSS receiver of android device
RTK GEO++
Log RINEX data from Raw Data
Matlab (Windows)
GNSS Raw Data
Raw Data Analysis
Linux

8. Sample Data Data for RTK GNSS Raw Data from u-blox
GNSS Raw Data from Android Device
MADOCA Correction Data
Base-Station Data at RMIT
NTRIP Address etc will be provided by RMIT NA
Rover Data
Sample Data Available
To be logged during RPD

9. Additional Information
Recommended Projects
Project Name
Project Description
Additional Information 1
Low-Cost High-Accuracy Receiver System
Based on Single Frequency RTK data from GNSS Receiver
If you have u-blox M8T or M8P device, please bring it 2
Based on Single Frequency RTK data from Android Device
If you have Android device with OS7.0 or higher, please bring to log data 3
Based on Dual Frequency RTK data from Xiaomi Mi8 Device
If you have this device, please bring it. 4
Interference, Jamming Monitoring
Septentrio GNSS Receiver Board will be provided to log data 5
Traffic Data Monitoring
Based on u-blox M8T Raw Data to NMEA data
Sample data from different cities will be provided
e. g. Hochi Minh City,
Bali etc
Please bring some sample data if you have and possible to distribute
ADD your own projects here that you are interested
List required data, devices and software

10. Data Logging Methods Static Observation in the campus …..
Depends on project type
…..

11. RMIT Base-Station Information
NTRIP Address
URL :
Port :
User ID :
Password :