1. OPS235: Week 5 Lab4: Investigations 1 – 3

2. Lab 4 – Part 1 - Topics Lab Time
Manually Mounting / Un-mounting Partitions
Purpose
Command-Line
How to automate (/etc/fstab)
Adding PVs to existing VGs
Graphical

3. Hard Disk Basics A partition is a virtual drive inside a hard drive.
There are many advantages in creating separate partitions including: separation of OS from programs, grouping program files, multi-boot systems, database efficiency (file sizes).
BIOS limits the number of partitions on a single hard drive:
Maximum of 4 primary partitions.
Extended Partition (a container for up to 16 logical partitions). To create more than 4 partitions, need to create at least one extended partition.

4. Hard Disk Basics
All devices stored in the /dev directory (including hard disks). Good to study typical directories in a Linux file system...
Hard drives begin with hd or sd depending on type of hard drive (eg. IDE or SCSI & SATA). A letter denotes each hard disk, and a following number denotes the partition number. /dev/sda1, /dev/sda2, /dev/hdb5
Unlike windows where your make reference to drives, in Linux all drives (and corresponding partitions) are files. There is more flexibility to mount different drives / partitions for different purposes: For example /, /home, /opt, etc...

5. System Admin: Hard Drives
What is a mount-point?
What is the purpose of mount / umount commands?
What various uses (syntax) of mount command?
What steps must be performed when using mount command?
How to verify that you have set up correct mount point?

6. System Admin: Partitions
What is the command to create a partition?
What are the various options (command line, internal)?
What could prevent partition from being created?
How to create partitions for other Operating Systems?
How to create a file system in a partition?
How to format a hard drive partition?

7. Creating Physical Volumes
As mentioned, LVM allows for scalability: for example, adding hard disks to allow file systems to grow.
We have demonstrated how to extend Logical volumes via Graphical and Command Line methods.
We only have 1 removable hard disk, but we can use LVM to “simulate” adding another Physical Volume to an existing Volume Group. This would allow extra space to “grow a file-system” if required. In other words, we can create a “virtual partition” for practice.
What is the method to add a PV to an existing VG? (graphical method, Command Line Method).