1. Low Voltage Products division
© ABB Group
December 3, 2018 | Slide 1

2. Low Voltage Products division
Key deliverables
Low-voltage products
Low-voltage systems
Product services
Markets served
OEMs, distributors, wholesalers and installers
Systems integrators and panel builders
End-users within building automation, marine, transportation, power utility, process industries and manufacturing industries
© ABB Group
December 3, 2018 | Slide 2

3. Sheet Steel Enclosure Production in Egypt Sheet steel enclosures - For Construction & Industry
Consumer units Comby & Protecta ranges boards and pan assemblies
MCB distribution Protecta , Minicenter Eco ranges Mirage S800 range Pan assemblies
MCCB distribution boards and pan assemblies Mirage T max range
Sub distribution boards Unikit range
Multi purpose industrial enclosures Power pack range
© ABB Group
December 3, 2018 | Slide 3
© ABB Group
December 3, 2018 | Slide 3

4. Sheet steel enclosures, Protecta MCB distribution boards
Complying with IEC 439-3, BS EN part 1 & 3
Color RAL 7035, grey
Protection category IP 41&IP54 on special request .
Available in multi row and bus bar type configurations
Rated voltage 230 / 400 V, 50 Hz
Rated capacity
Single and multi row type 100 A
Bus bar type 250 A
Range
Single row 6, 9, 13, 18 and 22 modules
Multi row 16, 32, 48, 64 and 80 modules
Bus bar 4, 6, 8, 12, 16, 20 and 24 TP & N ways
© ABB Group
December 3, 2018 | Slide 4
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 4 4

5. Sheet steel enclosures, Comby and Protecta SP & N consumer units
Complying with IEC 439-1, BS EN
Color RAL 7035, grey
Sheet steel enclosure,
surface and flush mounting
Protection category IP 30
Rated voltage 230 V, 50 Hz
Rated capacity 100 A
No. of modules
Comby: 7, 10, 16 and 20
Protecta: 6, 9, 13, 18 and 22
Knockouts, top and bottom
Complete with earth and neutral terminal and DIN-rail
Protecta supplied with pin comb busbar
Available with steel or clear plastic flap
© ABB Group
December 3, 2018 | Slide 5
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 5 5

6. Sheet steel enclosures, Minicenter MCB distribution boards
Complying with IEC 439-3, BS EN part 1 & 3
Color RAL 7035, grey
Protection category IP 41
Available in multi row and bus bar type configurations ( Surface & Flush ) mounted
Rated voltage 230 / 400 V, 50 Hz
Rated capacity
Multi row type 100 A
Bus bar type 160 A
250 A on request
Range
Multi row 20, 32, 48, 64 and 80 modules
Bus bar 4, 6, 8, 12, and 16,
TP & N ways
© ABB Group
December 3, 2018 | Slide 6
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 6 6

7. Sheet steel enclosures, ECO MCB distribution boards
Complying with IEC 439-3, BS EN part 1 & 3
Color RAL 7035, grey
Protection category IP 41
Available in multi row and bus bar type configurations
Rated voltage 230 / 400 V, 50 Hz
Rated capacity
Multi row type 100 A
Bus bar type 160 A
Range
Multi row 14,28, 42 and 56 modules
Bus bar 4, 6, 8, and 12 TP & N ways
© ABB Group
December 3, 2018 | Slide 7
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 7 7

8. Sheet steel enclosures, Protecta TP & N MCB pan assemblies
Complying with IEC 439-3, BS EN part 1 & 3
Rated voltage, 230 / 400 V, 50 Hz
Rated bus bar capacity 160 and 250 A
Various kits for incoming device options
No. of TP ways, 4, 6, 8, 12, 16, 20 and 24
Complete with 2 each earth and shrouded neutral bars
© ABB Group
December 3, 2018 | Slide 8
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 8 8

9. Sheet steel enclosures, Mirage S800 MCB distribution boards and pan assemblies
Complying with IEC 439-1, BS EN 60439, 1 & 3
Rated operational voltage 690 V ac
Rated bus bar capacity 250, 400, 630 A
Rated short time withstand currents up to 50 KA, ASTA certified
No. of TP ways: 2, 4, 6, 8, 12 and 16
Manufactured from 1.5 mm cold rolled steel, RAL 7035
Ingress protection IP 42 (IP 54 on request), pan assembly IP 20
Complete with earth and neutral bars
Top and bottom extension boxes and instrument panels available
© ABB Group
December 3, 2018 | Slide 9
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 9 9

10. Sheet steel enclosures, Mirage T max MCCB distribution boards and pan assemblies
Complying with IEC 439-1, BS EN & 3
Rated operational voltage 690 V ac
Rated bus bar capacity 200, 250, 400, 630 & 800 A
Rated short time withstand currents up to 50 KA, ASTA certified
No. of TP ways: 2, 4, 6, 8, 12 and 16
Manufactured from 1.5 mm cold rolled steel, RAL 7035
Ingress protection IP 42 (IP 54 on request), pan assembly IP 20
Complete with earth and neutral bars
Fixing of different frame sizes possible
Available range of accessories
© ABB Group
December 3, 2018 | Slide 10
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 10 10

11. Sheet steel enclosures, Unikit Sub distribution boards
Complying with IEC 439-1, EN and BS EN
Manufactured from 1,5 mm cold rolled sheet steel, as a built up enclosure
Color, grey RAL 7035
Rated operation voltage, 690 V
Rated current:
Unikit 150: 250 A
Unikit 250: 630 A
Short time Icw = 50 kA, 1 sec
Protection category IP 41 (with door)
IP54 on request
Available in sizes: (width 700 mm)
Unikit 150 – H, 700 and 1000 mm
Unikit 250 – H, 700, 1000, 1300 & 1900
© ABB Group
December 3, 2018 | Slide 11
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 11 11

12. Sheet steel enclosures, Powerpack Multi purpose industrial enclosures
Empty, (for customer solutions)
Standard solutions fitted with load break switches, switch fuses or changeover load break switches
16 / A
3 and 4 pole versions available
Changeover, 4 pole only.
Protection category IP 54
8 sizes
Hinged door
Strong reliable door lock
available also with key locking
© ABB Group
December 3, 2018 | Slide 12
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 12 12

13. Sheet steel enclosures Manufacturing & technical capabilities
Salvagnini Production Line
Punching and bending machine
Multi press head with hydraulic drives
Simultaneous or independent cuts
Max. material size 5 mm
Max. punching frequency 1200/min
Punching accuracy 0.1 mm
© ABB Group
December 3, 2018 | Slide 13
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 13 13

14. Sheet steel enclosures Manufacturing & technical capabilities
Corno Automatic Blanking & Bending Line
Blanking line, mechanical press 200 ton
40 strokes / minute
Table dimensions 1450 x 1000
Bending line, customised automatic bending line with stud welding
One enclosure every 10 seconds
© ABB Group
December 3, 2018 | Slide 14
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 14 14

15. LV Circuit Breakers, LV Fuses / Fuse Bases and LV Fuse gear
Activity
Assembly
Ceramic fabrication
Quality
Logistics
Service
Workshop
Area: 4500 sq meters on two floors
Designation
License from ITSCE to assemble breakers
License from NOCRL to assemble Fuse gear
License from Brush to assemble
Fuses
© ABB Group
December 3, 2018 | Slide 15
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 15

16. Moulded Case Circuit Breakers
Series produced in Egypt are:
Module SN/H630, 800
Range from 630 up to 800A
Isomax S1, S2, S3 and S5
Range from 10A up to 500A
© ABB Group
December 3, 2018 | Slide 16
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 16

17. Fuses and Fuse Switches
Series produced in Egypt are:
Fuses, Fuse bases (NH00,NH1, NH2 and NH3)
Range NH from 6A up to 630A
Fuse gear (SLBM)
Range SLBM 250A, 400A and 630A
© ABB Group
December 3, 2018 | Slide 17
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 17

18. Low Voltage Systems Product: Scope: Experience IEC MNS Systems
Sales & project management, engineering, assembly & testing, after sales service and commissioning
Experience
Over 30 years
Conventional switchboards MNS
Intelligent switchboards MNSiS
© ABB Group
December 3, 2018 | Slide 18

19. Low Voltage Systems Factories in 10th of Ramadan City
Area 2,400 sq. meter
Air conditioned and pressurized area
Capacity: 5000 cubicle per year
OHS regulated work area
© ABB Group
December 3, 2018 | Slide 19
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 19

20. Sheet steel enclosures Manufacturing & technical capabilities
General
Shearing machines
LVD Shear
Durma Shear
Punching machines
Trumpf TC 500 R
AMADA Pega 367
Bending machines
Trumpf V130
© ABB Group
December 3, 2018 | Slide 20
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 20 20

21. Sheet steel enclosures Manufacturing & technical capabilities
Trasmetal Painting Line
Automated painting line
Conveyor speed 3 mts / minute
300 sqm painting capacity per hour
© ABB Group
December 3, 2018 | Slide 21
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 21 21

22. Sheet steel enclosures Manufacturing & technical capabilities
Calibration & testing facilities
Research & design capabilities
State-of-the-art CAD systems
Certification
ISO 9001/2000
ISO 14001
© ABB Group
December 3, 2018 | Slide 22
© ABB Division Automation Products
<sheetsteel enclosure EG, range 0908>/ PN / December 3, 2018 | Slide 22 22