1. Safety Tests in Cosmetics
15 week

2. Safety Tests in Cosmetics
A cosmetic product put on the market within the Community must not cause damage to human health when applied under normal or reasonably foreseeable conditions of use.

3. Safety Tests in Cosmetics
Several mechanisms have been developed regarding consumer health protection:
List of chemicals which must not be contained.
List of substances which cosmetic products must not contain except under restrictions.
List of authorized substances, which may include coloring agents, preservatives and ultraviolet filters.
GUIDELINES

4. Safety Assessment of Cosmetic Ingredients
Acute toxicity
Skin absorption
Skin irritation
Mucous membrane irritation
Skin sensitisation
Subchronic toxicity
Phototoxicity and photomutagenicity
(in case of UV-light absorbing substances

5. Safety Assessment of Cosmetic Ingredients
Mutagenicity
Human data (if available)
Toxicokinetics
Teratogenicity, reproduction toxicity, carcinogenicity, additional genotoxicity
Metabolism studies

6. Material Safety Data Sheets (MSDS)
MSDS is a form containing data regarding the properties of a particular substance. Product stewarding and workplace safety: provide workers and emergency personnel with procedures for handling or working with that substance in a safe manner.

7. Material Safety Data Sheets (MSDS)
Chemical product and company identification
Composition/information on ingredients : CAS number, conc., etc.
Hazards identification
First aid measures
Fire fighting measures
Accidental release measures
Handling and storage
Exposure controls/personal protection

8. Controlled Use Test
Performed under normal or slightly exaggerated use conditions.
Exposure/application conditions (which may vary widely for different product types) and evaluations are controlled and standardized.

9. (Uncontrolled) Use Test at Home
Test under normal use conditions.
Participants may be selected to represent different categories of consumer, e.g., of particular skin types.
Large groups of volunteers and over a test period of a duration which is considered to be adequate to evaluate skin compatibility under normal, uncontrolled, use conditions at home, with periodic expert assessments of skin condition, and including comments by the volunteers on subjective effects.
May be useful in assessment of product efficacy and acceptability

10. Test Sample(s)
Reference samples – to check inter-/intra-laboratory variations, inter-seasonal variability.
Concentration – adjusted/diluted according to the type of product, test protocol, study objective so as not to cause severe skin effects.

11. Dose Level Patch tests - measured amount of test material.
Use-related tests – quantity applied should be relevant to that expected to be used at home.

12. Assessments: Patch Tests
VISUAL ASSESSMENT of skin compatibility:
scored by same experienced assessor who made the baseline assessment.
Same lighting source.
Predefined scoring scale.

13. Assessments: Patch Tests
INSTRUMENTAL MEASUREMENT
Measured after an acclimatization period in an environmentally conditioned room.
Instruments must be calibrated regularly

14. Data Interpretation
Statistical analysis must be valid and specified in the protocol.
Usually compare the new test product with those of positive and/or negative controls, or similar products with a substantial history of safety in the market.

15. in vitro Testing for Ocular Safety
BCOP - Bovine Cornea Opacity and Permeability Test;
FLT - Fluorescein Leakage Test;
HET-CAM - Hen’s Egg Test - Chorioallantoic Membrane;
RBC - Red Blood Cell Test;
TEA - Tissue Equivalent Assay.

16. In vivo testing