1. Brazing Metals Quiz

2. Aluminium to Aluminium
Brazing is used to join which
two metals?
Brass To Brass
Copper To Copper
Steel to Steel
Aluminium to Aluminium

3. 2. What is the filler rod made
from?
Silver
Iron
Tin
Aluminium
Steel
Copper
Brass

4. Because aluminium is non ferrous
Why would it be impossible to
braze aluminium with normal
brass brazing rods?
Because Aluminium is too hard
Because Aluminium has too low
a melting point and would melt
before the brass
Because Aluminium has too high
a melting point and will not melt.
Because aluminium is non ferrous

5. At approximately what
temperature does brazing take
place.
200˚C
300˚C
400˚C
500˚C
700˚C
900˚C
1100˚C

6. Wet & Dry Silicon Carbide paper
5. Which of the following abrasive materials would be used to clean the steel
before brazing?
Wet & Dry Silicon Carbide paper
Emery Cloth
Wire wool
Aluminium Oxide paper

7. What is the flux used for ? (Click on the two correct answers)
To prevent the steel oxidising
during the brazing process
To speed up the brazing process
To clean the metal by dissolving
any oxides already present
To make the final joint stronger

8. What is the flux used for ? (Click on the two correct answers)
And the second reason is….
To prevent the steel oxidising
during the brazing process
To speed up the brazing process
To clean the metal by dissolving
any oxides already present
To make the final joint stronger

9. 7. The correct temperature is
reached when the work piece
is ……
Dull red
Cherry Red
White Hot
As hot as possible

10. 8. When completed the work
piece should be cooled ….
Slowly
Under cold water
Does not matter

11. Quiz Completed
Well Done

12. 
Wrong
Click here to try again