1. Does Mass Influence the Amount of Energy an Object Has?

2. Experimental Design
How many variables should be different in a controlled experiment?
ONE, UNO, 1!!!!!
What is this variable called?
Independent Variable- The 1 variable that I change, The 1 variable that we are testing.
So what is it for this lab?
Mass

3. What variables are we controlling
What variables are we controlling? This means, what could be different in the lab?
Height of the track.
Where the steelie is released from (speed).
Anything else?
All of these are called Controlled Variables.

4. OK, How will we know if mass is effecting Kinetic Energy
OK, How will we know if mass is effecting Kinetic Energy? What will we measure?
The distance the tee moves.
This is called the Dependent Variable, because we think that the distance the tee will move depends on the mass that we use.

5. What do the results show?
Data
Steelie
Class Average
Distance tee was pushed
Big
(28.6g)
60.1
Medium
(16.2g)
39.2
Small
(8.3g)
18.8

6. Mass (g)
Distance (cm)

7. The Answer? YES!!! The large mass pushed the tee the furthest distance
As mass increased, the amount of work done also increased
Since both variables increased, mass and work must have a direct relationship

8. A New Type of Relationship
Mass and work also share a second type of relationship, called a linear relationship.
Compare the distance the tee was pushed by a 10g mass and a 30g mass:
10g mass pushed tee 22cm
30g mass pushed tee 68cm

9. Linear Relationship
As the mass increased by 3 times (20g to 60g) the work done on the tee also increased by 3 times (22cm to 68cm).
This is known as a linear relationship.
On a graph, a linear relationship is shown as a straight line

10. Linear Relationship Example # 2
Compare the distance the tee was pushed by a 20g mass and a 60g mass:
20g mass pushed tee 27cm
60g mass pushed tee 88 cm

11. A New Type of Relationship
As the mass increased by 3 times (20g to 60g) the work done on the tee also increased by 3 times (27cm to 88cm).
This is known as a linear relationship.
On a graph, a linear relationship is shown as a straight line

12. I thought we were trying to show a relationship between mass and kinetic energy…
The purpose of Lab 1.3 was to determine the type of relationship between mass and KE
We measured mass and work done (the distance the tee was pushed)
How can we relate work to KE?

13. Linking work and KE
We will use the following mathematical argument to link work and KE:
If A = B
And B = C
Then A = C

14. Linking Work and KE
As mass of the steelie increased, work done increased (A = B)
More work requires more energy to do the work (B = C)
Therefore, an object with greater mass must have more energy (A = C)