1. October 31, 2016 Syllabus Oral 1 Attendance Unit Problem Feedback
Table of Contents

2. Syllabus – Rev E 10 M 10/31 W 11/2 T of Cntnts Theory References
Theory
References
Unit ProblemFeedback, References, ToC
Quality and Reliability ( Dr. Krishna Pattipati) 11
M 11/7 W 11/9
Assessment
Theory section Feedback/Assessment 12
M 11/14 W 11/16
Oral 2 presentations/Data Visualization – Dr. Barber 13
M 11/21 W 11/23
Thanksgiving break – no class Thanksgiving break – no class 14
M 11/28 W 11/30
Interim Rpt
Reports given to me/advisor/- //meseniordesign
Oral Presentations 2 Analysis Results, Experiment 15
M 12/5 W 12/7
F 12/9
Oral Presentations 2 Analysis Results, Experiment Oral Presentations 2 Analysis Results, Experiment
Classes end/ Intersession Plan due
W 12/14
Interim Reports returned to teams
M 1/17
Classes begin – Final Interim Reports edited in folder

3. Ansys Training
35/44 – fluids
19/36 - mechanical

4. Expect Higher Oral 2 Attendance%
attended
𝐴=𝜋 𝑟 2
~40%

5. Unit Problem Feedback Examples of information presentation
Results perception
Guidelines for the Interim Report

6. Dimensions Help Describe the Problem
Square, round ?
C/L ?

7. Put Dimensions on the Figure
Keep units consistent
36X2x2 in

8. What’s the Size?? Break to show larger portion of the mesh
Boundary Conditions
P,V,W
Make bigger
What are the boundary conditions?

9. Not Very useful Set scale to useful numbers Scale ends
Boundary conditions?

10. Annotation makes more useful
Set scale
Boundary conditions ?
dimensions
Distance for fully developed flow?

11. Don’t put too much in one figure, break up
confusing
Too
small
Label
Time = 100sec
Label
Front
back
Don’t put in stuff
If you are not going
to talk about it
Why is it important?

12. Making the reader Work too Hard
What is
Von Mises stress
Is it different than
P/A for this
analysis
Don’t make the reader
Have to figure this out
What are units?

13. Be clearer, use engineering terms
Can’t read
Where did this come from?

14. Making the reader work too hard

16. Be more specific

17. Interim Report Format Cover Page i Abstract/Executive Summary
ii Table of Contents
iii List of Figures
iv Nomenclature/Glossary
I. Introduction……………………………page #
II. Problem Statement…………………..page #
III. Theory
Governing equations
Your modeling
Test rig
IV. Design/Analysis
V. Results
Model validation
VI. Schedule
VII. Summary
VIII. References
IX. Appendices

26. Important Dates April 28, 2017 Monday Nov 28 Interim Reports submitted
180 days
Monday Nov 28 Interim Reports submitted
2 copies (1 color to me, 1 b/w to advisor – ask format)
Copy in \\meseniordesign
Friday Dec 9 Intersession Plan due
Wednesday Dec 14 Interim Reports returned to teams with comments
Monday January 17 corrected Interim reports in your folder

27. Last Comments
Effort is necessary BUT You are judged on results