1. P17452 Dresser-Rand System Health Monitor System Level Design Review
Anthony Ballister
Dylan Boberg
Jehad Al Dabbous
Matthias Galley
Fernando Soto
Andrew Gordon
Matthias

2. Agenda Systems Architecture (2:00 - 2:03)
Functional Decomposition (2:04 - 2:10)
Benchmarking (2:11 - 2:13)
Concept Development (2:14 - 2:16)
Morphological Charts (2:17 - 2:33)
Concept Selection and Feasibility (2:34 - 2:50)
Use Case Scenarios (2:51 - 2:54)
Behavioral Charts (2:55 - 2:57)
Risk Assessment (2:58 - 3:00)
Plans for Next Phase (3:00 - 3:05)
MAtthias

3. System Architecture
Charts made by Fernando F. Soto

4. Functional Decomposition
Dylan

5. Comparison of other health monitoring systems
Benchmarking
Comparison of other health monitoring systems
Andrew Gordon
Arduino is 2.7x2.1

6. Concept Development Selection Criteria:
Below are the criteria pulled from customer and engineering requirements that the components of the system should be chosen and compared to based on their individual capabilities. These selection criteria are:
Data Transmission Rate
Data Transfer Range
Durability
Ease of Execution of Programming
Sampling Rate
Easy to Use
Latency of System Set-Up
Compactness
Storage Space/Memory
Low Cost
Accuracy/Precision of Samples
Dylan

7. Morphological Chart
Dylan

8. Concept Selection #1 (Datum)
Dylan - Data processing will be done on the receiving device instead of the processor.

9. Concept Selection #2
Dylan

10. Concept Selection #3
Dylan

11. Concept Selection #4
Dylan

12. Concept Selection Pugh Diagram
Overall Concept +/- of Concept Selections
Anthony Ballister
We have 4 major design concepts including our Datum
Briefly go over applicable fields and their importance to the project

13. Concept Selection Hardware Interfacing Displaying the state of device
Mounting the device
Jehad
This is one of many various subsystems that is involved in our project. We are only showing one datum because it would take too much space to show the various datums, we have an excel spreadsheet that has all the different datum alterations. I’m not going to go through the selection criteria, I will mention that by just looking at the different options for displaying the state of the device. Visualizing alternating the datum it can be seen that the LED is the best option. The same can be said in regards to rubber feet for mounting the device.

14. Concept Selection
Acquire data
Accept data
Protect device
Matthias

15. Protection Feasibility
Matthias

16. Concept Selection Process measurements Final data storage
Database solution
Anthony Ballister

17. Data Storage Feasibility
Anthony Ballister

18. Concept Selection Process measurements Process data Transmit data
Andrew Gordon

19. Transmission Feasibility
Andrew Gordon

20. Sampling Feasibility
fernando

21. Concept Selection Display measurements Basic development process
Graphics library
fernando

22. Concept Selection Power system Powering device Activate device Jehad
I’m not going to go through the selection criteria, I will mention that by just looking at the different options for Activating the device and visualizing alternating the datum it can be seen that either the button or slide switch are the best options. The same can be said in regards to AC power for powering the device.

23. Sensors Feasibility
Jehad
This leads into the next feasibility slide

24. Set-Up Feasibility
Jehad

25. Use Case Scenarios
Charts made by Fernando F. Soto

26. Behavioural Charts
Charts made by Fernando F. Soto

27. Software planning
fernando

28. Risk Management
Jehad
These are the risks involved in the project which we touched on during the last presentation, the only update that was made was in regards to the app development aspect of the project.

29. Plans for the Next Phase
• Determine wireless method
• Determine final hardware inputs
• Compile a bill of materials
• Develop a set of tests to satisfy the engineering requirements
• Look into PCB microcontroller design
• Research application development tools
• Investigate user friendly displays for the application
• Determine final mobile platform for the application
• Research robust packaging option and costs
• Update team with all aspects of the project
Anthony Ballister

30. Gantt Chart
matthias