1. Gothic arch break-down chairs Original chairs by Sir Kragon, original plans by Master Terafan and now modified by Barún Pól Ó Briain

2. to make this chair back 40” 41” 10” 11” 20.5” 24” 1 of each of these,
glued together

3. Arm Rise (Cut/assemble two per chair) Seat (Cut one per chair)
20.5”
24”
16”
Three times the thickness of the sides
The thickness of the sides
16.5”
Front of Seat
Chair Legs (Cut two per chair)
21.5”
16.5” 5”
Detail of the tabs
The left space (shaded area) is the
thickness of the sides of the chairs.
(I used ¾” plywood.) 8”
18”
26”
29”
1.0”
.75”
1.5”

4. 21.5”
Position the seat slots so the rear of the seat is 1” lower than the front.
Make the line of the slots for the back perpendicular to the seat, (dashed line)
16.5” 5”
29”
10”
26” ½”
18”
17” 8”

5. How to layout on 4’ X 8’ sheets of Plywood
12mm or ½” Plywood
18mm or ¾” Plywood