2. An ISO 9001 certified We offer our services to a wide range of networks such as GSM, CDMA and UMTS networks We Sells SPY Cams & security Cameras We have Creative and Experience Team for Outsourcing (RNO/RF Engineer/BTS Engineer/Drive Test & Optimization Engineer/Technician /Rigger Antelope Technologies is a service provider company in telecom sector where we strive to deliver the best to our customers. Our strength lies in our pool of experienced and highly trained professionals. We deliver practical and feasible solutions using specialist test equipments project management expertise.

3. To be preferred partner for integrated Services for IT, Telecommunications, Wire line & Wireless Networks. RF & MW Engineering Network Integration & AMC Telecom Network I & C Manpower Outsourcing(RNO/Engineers/Technician) EMF Survey & Testing (Narda/ Aaronia/Agilent) SPY Cams & Security Cameras Vision & Mission

4. 1.RF Survey Suitable candidate selection from RF point of view based on Nominal Plan released by RF planning team. Feasible RF candidates are selected within prescribed Search ring. GPS Coordinates, altitude, height of building are measured; height of tower/pole is decided based on RF data. Obstacles if any are noted within 360 degree vicinity of the site. Pictures of the surrounding Clutter are taken from 0 to 360 degrees. Reports are prepared & submitted to the customer TOOLS USED Handheld GPS Binoculars Altimeter Digital Camera Measuring Tape Laptop (Optional)

5. 2. Transmission Survey( Access & Back Bone) LOS & Fresnel Zone Survey is carried out. In Backbone links map Plotting & route tracking is done to achieve high level of accuracy. Feasible Tx candidates are selected within prescribed Search ring. GPS Coordinates, altitude, height of building are measured; height of microwave antenna is decided based on Tx data. Obstacles if any, are noted within the LOS to the other end site Reports are submitted to the customer TOOLS USED Digital Camera Handheld GPS Binoculars Altimeter Measuring Tape Inclinometer. Survey of India Maps Laptop (Optional)

6. 3. Drive Test & Optimization(GSM,CDMA,UMTS) Physical & RF audit of the site. Drive test is performed within the sectors of BTS site and around it's adjoining areas. RF Parameters of cell site are collected & compared with the RF Data sheet during Drive Test. Mismatch if any is rectified. Intra cell, Inter cell handovers are checked & made, sector swaps/cable swaps are taken care of during Drive Test. Checking whether Frequency hopping is implemented as per the RF Planning data. Co-Channel & Adjacent Interference is noted down. GPRS Drive Test is done which includes establishing FTTP sessions and all. Post Drive Test Analysis is done. KPI Analysis is done. CSSR, HOSSR, CCR, DCR etc. Optimization of network in terms of cell parameters and at physical Level too, like height reduction, change of antenna tilts etc. TOOLS USED TEMS, Nemo, Neptune, Probe, CAN-CNT Drive Test Kits as per requirement. Laptop Car Inverter Monitoring Engineering Handset

7. 4. Frequency Planning Radio Network planning of green field sites/new sites within existing network C/I Planning LAC Planning BCCH Planning. BSIC Planning Neighbor Cell Planning and listing SWAP Planning in case of SWAPS. Nominal Planning in case of new network Coverage & Capacity analysis Managing RF Survey information for site placement and candidate finalization for new cell sites search area locations. Proper implementation of frequency hopping techniques to reduce frequency interference & ensure optimal usage of available frequency spectrum Is done to check & optimize the performance of customer's GSM, CDMA Network In comparison to other operators. Drive test (GSM, CDMA & GPRS) is performed for own as well as other Competitors on pre defined routes. Analysis of Drive Test data. Presentations given to the customer which includes Rx Lev Plots, Rx Qual Plots, SQI Plots, BCCH Plots & KPI Analysis of own as compared to other competitors. Problematic areas within customer's network are identified & solutions to resolve them are given to the customer.

8. 5. Network Benchmarking Is done to check & optimize the performance of customer's GSM Network In comparison to other operators. Drive test(GSM & GPRS) is performed for own as well as other Competitors on pre defined routes. Analysis of Drive Test data. Presentations given to the customer which includes Rx Lev Plots, Rx Qual Plots & KPI Analysis of own as compared to other competitors. Problematic areas within customer's network are identified & solutions to resolve them are given to the customer. Tools we use : 4 ASCOM MTU-4 (TEMS SYMPHONY) 4 SwissQual Benchmarker PCM I Nemo Invex

9. 6. BTS Installation, SWAP & Commissioning Installation of BTS Checking of power & return loss measurement of BTS & feeder cable. Commissioning of BTS De-Installation of BTS Packaging & Transportation of BTS TOOLS USED Installation Tool kit. RF Power cum VSWR Meter. Packaging material. Transportation vehicle. BTS Commissioning Tools (Vendor Specific).

10. 7. Wireless Network Solutions Feasibility studies and analysis Network planning and design Site Acquisition, Zoning and Permissions System engineering and project management Network construction Testing, commissioning and integration Operation management services

11. EMF Testing Tools We Use: Agilent Spectrum Analyzer, Isotropic Triaxial Antenna, Wooden Tripod, RF Cable, Auto Switch, Laptop With EMF Analyzer Software, Laser Distance Meter, Magnetic Compass, Digital Camera, GPS Electro Magnetic Field Testing (EMF) Background The field can be viewed as the combination of an electric field and a magnetic field. The electric field is produced by stationary charges, and the magnetic field by moving charges (currents); these two are often described as the sources of the field. The way in which charges and currents interact with the electromagnetic field is described by Maxwell's equations.

12. SPY CAMS We offer Various type of spy cams at very low price.

13. 24 X 7 Customer Support World Class Technologies Latest Electronics Products @Lowest Price in MRKT Experience in Telecom Services ISO Certified WHY ATPL! Quick Solution for various Industries Onsite Training