2. AUTOMATIC INDUSTRIAL STATION FOR VEHICULES TEAMS OF INTELLIGENT VALVES Module 2: operation types

3. Siemens Schrader (GB) Each valve has: An antenna for reception + An antenna for emission

4. - Schrader (GB) (125 KHz / 315 MHz FM (FSK)) - Siemens, Beru ( Allemagne) (125 KHz / 315 ou 433 MHz) - TRW ( USA) (125 KHz / 315 Mhz (ASK)) - SMART TYRE (125 KHz / 433 MHz (ASK)) - Toyota (Lexus) (125 KHz /315 MHz) - Pacific valve (Asie) - Johnson control (SAGEM) - etc……… Details on the valves available on the market : After being awaked, the valve transmits its identifier and the pressure of the wheel. Each valve is programmable and can be sent to sleep again. Example of information: Remaining lifespan of the battery, date of production of the valve, moisture, acceleration, Temperature.... Note: in general, to function the valve must be under pressure (> 500 mbar)

5. Waiting time for detection of the vehicle PHASE 1

6. Detection of the balancelle and the Vehicle PHASE 2

7. Detection of the wheel right-hand side PHASE 3

8. Launching of the cycle right antenna PHASE 4

9. Recovery of the identifier of the valve PHASE 5

10. Detection of the nose gear wheel left PHASE 6

11. Launching of the left cycle antenna PHASE 7

12. Recovery of the identifier of the valve PHASE 8

13. Even proceeded with the back valves Back wheels

14. Sending of information to the network machines Results

15. Technical configuration VT520 Network machines x 1 control cabinet, 1 VT520, 2 antennas

16. Each valve has its own identifying code => the driver knows which wheel is concerned with a possible problem of under-inflation. This identifying code is also used to avoid an interference between 2 vehicles stationed one beside the other. Installed on the line of production, the station will transmit each code-identifier to the calculator of the vehicle, by the intermediary of the network machines. Without that, the dashboard of the vehicle would indicate a "error", because no valve would be recognized by the calculator of the vehicle.

17. Frequency of activation: 125 KHz. l Range: adjustable of 20 cm at 60 cm maximum. l Cycle time : generaly 60 sec. * l Emission field: approximatively +/- 20 A/m (contact). l Reception AM/FM: 433 and/or 315 MHz (only one installation = bi-frequency) l Tape speed of the line of assembly: until 5m/min* STATION TPMS: Technical data antenna / network * depends on type of valve and line of assembly

18. Interface VT520 or PC and/or API l Detectors of presence vehicles l Laptop connected to the network l 2 sets of antennas (1 set on each side of the vehicle) l Each set has: - An antenna for reception - An antenna for emission - Electronics of power Technical data of the station x

19. Links control panel Link TOR RS 485 Modbus Link Internal link ATEQ PROFIBUS link TCP IP link Réseau usine x Read head unit position sensor detection cells wheels Control button

20. Vehicle calculator Rolling : 5 at 7 sec ou + Parking: 15 min If change of state of pressure = > emission signal When does the valve emit ?

21. Module 3: applications