1. Processor Organization and Architecture
Module III
Processor Organization and Architecture

2. Micro-programmed Control Unit

3. Microprogrammed Control
Microinstruction
The microinstruction specifies one or more microoperations
Microprogram
A sequence of microinstruction
Dynamic microprogramming : Control Memory = RAM
RAM can be used for writing (to change a writable control memory)
Microprogram is loaded initially from an auxiliary memory such as a magnetic disk
Static microprogramming : Control Memory = ROM
Control words in ROM are made permanent during the hardware production.

4. Microprogramming Approach
Generally micro-operations consist of two important fields :
Control Field : indicates which control signals are to be activated
Next Address Field : specify address of next microinstruction
Major Design Effort : Minimize Length of microinstruction.

5. Microprogramming Approach

9. Microinstruction Formats
There are two types of formats:
Horizontal Microinstruction
Vertical Microinstruction

10. Horizontal Microinstruction
For sequencing control word,
an address field is added to it to indicate the next control word to be executed and
a few bits are added to specify the condition for next control word execution

11. Horizontal Microinstruction Format
Internal CPU control line: one bit for each internal processor control line.
System Bus control line: one bit for each system bus control line.

12. Horizontal Microinstruction Format
Condition field: indicates condition for taking branch
Address field: address of the next micro-instruction to be executed, if the branch is taken.

13. Interpretation of Micro-instruction
1. To execute this microinstruction, turn on all the control lines indicated by a 1 bit; leave off all control lines indicated by a 0 bit. These control signals will execute one or more micro-operations. 2. If the condition (indicated by the condition bits) is false, execute the next microinstruction in sequence. 3. If the condition is true, execute the next microinstruction pointed by the address field.

14. Disadv of Horizontal Microinstruction Format
Length of the microinstructions is high
The bits of the micro-program word cannot be used efficiently. i.e. Not all microinstructions allocate useful meanings to all the available fields.

15. Vertical Microinstruction Format
It uses few bits in the control word
It has the control word with only two fields:
First field is a code
Second field indicates the meaning of the code
It execute simple operations, such as: load, store, add, branch similar to machine-language instructions and hence it is also called software microprogramming.

16. Vertical Microinstruction Format

17. Disadv of Vertical Microinstruction Format
Speed of execution reduces proportionally with the number of distinct meanings of the code field

18. Control Memory Organization
Microinstructions in each routine are to be executed sequentially
Each routing ends with JUMP instruction indicating where to go next
There is a special execute cycle routine to signify which routine is to be executed depending on opcode

20. Microprogrammed Control Unit

21. Microprogrammed Control Unit
It executes a set of microinstructions are stored in control memory
Control Address Register (CAR)
Contains address of next microinstruction to be read
Similar to MAR
Control Buffer Register (CBR)
Contains control word of the currently executing microinstruction
Sequencing Logic Unit
It loads CAR and issues a READ command

23. Functioning of Micro-programmed CU
To execute an instruction, the sequencing logic unit issues a READ command to the control memory.
The content of the address specified in CAR is read into CBR
CBR generates control signals and next address information for the sequencing logic unit.
Sequencing logic unit loads a new address into CAR based on the next-address information from CBR and the ALU flags.

24. Calculating Next Address
Depending on the value of ALU flags and CBR, one of three decisions is made:
Get the next instruction:
CAR  CAR +1
Jump to a new routine based on a jump microinstruction:
Load the address field of CBR into CAR.
Jump to a machine instruction routine:
Load the CAR based on the opcode in the IR.

25. Two Decoders Upper Decoder: translates the opcode of the IR into CAR
Lower decoder : used only for vertical microinstructions
In a vertical microinstruction, a code is used for each action to be performed and the decoder translates this code into individual control signals