1. Extremely High Throughput (EHT) 802.11 – study group creation
Month Year
Doc Title
Extremely High Throughput (EHT) – study group creation
Authors:
Date:
Name
Affiliation
Address
Phone
Laurent Cariou
Intel
2111 NE 25th Ave, Hillsboro OR 97124, USA     
Robert Stacey
Xiaogang Chen
Po-Kai Huang
Laurent Cariou, Intel
John Doe, Some Company

2. In May, we agreed to create a study group on EHT
During the May meeting, we proposed the creation of a study group to increase peak throughput with the following features: 320MHz, multiband aggregation and 16 spatial streams.
Document 789r10 ( 0wng-extreme-throughput pptx) is describing the proposed scope.
A strawpoll was run in the WNG session (96 Y, 1 N, xx A):
Do you agree to start a study group to define new features of on bands between 1 and GHz with the primary objective to increase peak throughput with the following candidate features: 320MHz bandwidth, multiband aggregation and operation, and 16 spatial streams.  In addition,
The study group will discuss high throughput applications such as video-over-WLAN, AR and VR
The study group may discuss additional objectives and features. Final set of features shall be determined within 6-months, which should be also the maximum duration of study group.
The study group may define procedural enhancements to make standards development more efficient and scalable.
Slide 2
Laurent Cariou, Intel

3. We motioned the creation of a TIG to initiate discussion in July
A TIG was then created to initiate discussion (as a study group can not be created during interims)
Approve formation of an XT TIG to initiate discussion on new features for bands between 1 and GHz:
with the primary objective to increase peak throughput
candidate features include but are not limited to: 320 MHz bandwidth, multiband aggregation and operation, and 16 spatial streams, as described in
To support high throughput applications such as video-over-WLAN, AR and VR
Laurent Cariou, Intel

4. TIG discussions during July meeting
This TIG is a way to initiate study group discussion during the July meeting, with the promise that it will transition into a SG at the end of the July meeting
We should then have discussion as if we were in a study group
The motion to create the study group is a formality that we need to do during the July meeting
Laurent Cariou, Intel

5. Motion to create EHT Study group
Following the agreement we reached in May, we can easily define the motion text to create the study group by adapting the TIG motion into a SG motion
Next slide defines this baseline motion proposal
This is the baseline proposal that is agreed by all as an outcome of the May meeting
During the July meeting, we can further discuss and have presentations in order to see if we can have a scope that is even more precise and if we can have a motion text even more precise
If we need more time for this, we fall back naturally to the baseline motion proposal
Laurent Cariou, Intel

6. Baseline proposed motion for EHT study group
Approve the formation of the Extremely High Throughput (EHT) study group to consider development of a Project Authorization Request (PAR) and Criteria for Standards Development (CSD) for 1 to GHz operation
With the primary objective of increasing peak throughput to support high throughput applications such as video-over-WLAN, AR and VR.
Candidate features include but are not limited to: 320 MHz bandwidth, multiband aggregation and operation, and 16 spatial streams, as described in pptx.
Laurent Cariou, Intel