1. Throughout Problems

2. Problem 5.4
5.4 – Reconsider the ACE production process introduced in Exercise 4.4
a. What is the theoretical capacity of the ACE production process?
b. Unable to meet demand for this bike, Honda wants to increase throughput. A team member suggests cross training the engine and the sear assemblers. Should this suggestion be implemented? If so, why? If not, why not, and what do you suggest?

3. 5.4. The Process Flowchart from Problem 4.4
2 min
1 min
3 min
molding
eng. ass.
welding
aut. molding machine
1 engine assembler
1 molding operator
1 min
3 min
stamping
welding
30 min
start
continuous welding machine
end FA
1 welder
2 min
stamping
10,000lbs press
10 final assemblers
1 press operator
7 min
seat ass.
2 seat assemblers

4. 5.4. The Process Flowchart from Problem 4.4

5. 5.4. The Process Flowchart from Problem 4.4
Unable to meet demand for this bike, Honda wants to increase throughput. A team member suggests cross-training the engine and seat assemblers.
This suggestion should not be implemented because these resources are non-bottlenecks and therefore do not impact system throughput.
We suggest increasing bottleneck capacity by decreasing welding times by design or process improvements.
Other options are buying another welding machine and adding another welder, outsourcing some welding.

6. Problem 5.5
5.5 – NewLife Finance handles two types of claims: hospital and physician. NewLife charges the HMOs $10 per hospital claim (HC) and $9 per physician claim (PC). The variable costs per claim are negligible. The theoretical capacity of the process is 375 claims per day in the case of HC and 545 claims per day for PC. a. What of the two types of claims is more profitable for NewLife? b. Assume that the maximum number of PCs available for processing per day is 400. What is the best product mix for NewLife?

7. Problem 5.5 (a) PC:is the more proftable product:
The profit from HC is 10×375 = $3750 per day.
The profit from PC is 9 × 545 = $ 4905 per day
(b) Assume 480 minutes per day.
The unit load for HC is 480/375 = 1.28 minutes per claim.
The unit load for PC 480/545 = 0.88 minutes per claim.
The time to make 400 PC claims is then 0.88 × 400 = 353 minutes per day.
This leaves = 127 minutes for HC.
At 1.28 minutes per unit, this allows for 127/1.28 = 99.8 (roughly 100) units.
The best mix is 400 PC and 100 units of HC per day. (80% and 20%)

8. Problem 5.6
5.6 – Recall from this chapter that the Tile&Style Company produces kitchen and bathroom tiles in two sizes: jumbo and regular. A bundle of tiles contains 4 jumbo tiles or 9 regular tiles and is cut out of single, larger plate. The cutting time per bundle is 1 minute for jumbo and 2 minutes for regular. Currently, 75% of the bundles are regular, and 25% are jumbo. Typically, Tile&Style produces 300 bundles of regular tiles before it switches over and produce 100 bundles of jumbo. The switching time from one size to the other is 30 minutes in both directions. Plates are cut into tiles by a cutting machine that is available 8 hours per day. The availability loss factor is 20%. a. Compute the theoretical capacity of the process (bundles per hour) b. Compute the effective capacity of the process (bundles per hour)

9. Theoretical Capacity = 480/1.75 = 274.3 Aggregate Product
Problem 5.6.
Theoretical Capacity = 480/1.75 = Aggregate Product
Effective Capacity = .8(480)/ 1.9 = Aggregate Product
What is an aggregate product?
It is .75 Regular and 0.25 Jumbo
Therefore; aggregate is regular bundle and Jumbo bundle