1. Press login Icon to log into Qualcomm unit.
HOME SCREEN
Press login Icon to log into Qualcomm unit.

2. Driver login to Qualcomm
Driver ID: Your alpha code
Password: Last four digits of your social
Press OK after you have inputted this information.
4. Press yes for unassigned driver time
This is the screen showing that the driver logged into Qualcomm correctly.

3. Driver logging into Total Mail
From home screen:
1. Press the messaging icon
Total Mail Login Macro
From the messaging screen:
Press Compose icon
Press Driver Login Icon

4. Pre assignment procedure
Driver Login Screen
Put in your alpha code.
If using the virtual keyboard. Press red X to get to step 3. Otherwise skip this step.
Press send button.
Press yes when asked to send the message. You will get this prompt every time you send a message
Pre assignment procedure
Press the home key to get back to this screen. When your pre assignment comes in, then messages appear in the messaging icon.
Press the messaging icon to get your pre assignment.

5. Screen 2 Pre-assignment acceptance:
Pre-assignment message
The highlighted message is your pre assignment.
1. To highlight the message, press the message
2. This will take you directly to the pre-assignment.
Screen 1 is the Pre-assignment message.
1. Read the message to make sure this is the correct assignment.
2. If this is the correct assignment, press the reply button on the bottom of screen. (You will get the message in screen 2.)
3. If this is not the correct pre assignment, then press the arrow at the bottom left of the screen. This will take you back to the message screen. You will be able to pick the next available pre assignment.
4. If there is not another pre assignment, then call Dispatch.
Screen 2 Pre-assignment acceptance:
1. Press the down arrow. Beside the (Y, N)
2. Y / N appears in the drop down.
3. Press Y to accept the load.
4. Press Send at the bottom right of the screen
5. Messaging will ask you to confirm that you want to seen the message. Press yes. It will do this every time you send a message.

6. Load Header Message/ Pick Up Arrival
From the messaging window, press the inbox icon.
1. Press the “Load Header” message. This will take you to the Load Header message.
2. Read the message and press reply.
3. Press Reply again.
4. Press send. This starts you on your run in our dispatch system.
Screen 1: From Inbox, what’s highlighted is the Pick up Arrival Message
1. Press the message with PUP-A, to highlight.
Screen 2: Pick up Arrival Message
Press Reply.
Press Reply again. This will take you to screen 3
Screen 3: This screen shows the message that is sent to Total Mail
1. Press Send in the lower right hand corner of screen.
Screen 4: Confirming that you want to send the message.
1. Press yes, this will send the message

7. Picking up Departure Message
Screen 1: Highlight Pickup departure message
1. Press the message that says: PUP-D
Screen 2: Pick up departure message
1. Press Reply, and then Reply again to send it to Total Mail.
Screens 4 & 5: This information is needed to complete your departure
Press the box beside Count. Enter the amount of skids or boxes
Press the drop down arrow. Press Box or PLT
Press the box beside Weight. Enter the weight of the skids or boxes
4. Press the box beside Dunnage. Enter the amount of dunnage delivered to the stop. If none enter “0”
5. Confirm the trailer # is correct. If not then enter the correct trailer number.
6. Press the box beside BOL#. Enter the BOL number. If you have more than one BOL enter it the COMMENTS Box.
7. If using the virtual keyboard like in the example above, then press the red X Press send.
All of the information must be entered for the message to send. The send button will not work until you have entered all of the information stated above.

8. Drop Departure Message
Drop Arrival Message
Follow the same steps as with the Picking Up Arrival Message.
The only difference will be to pick the correct message, which is “DRP – A”.
Drop Departure Message
Screen 1: From Messaging Screen
1. Press the Inbox icon.
2. Press the message with “DRP-D”, this will take you to screen 2.
Screen 2: Drop Departure Screen
Press the reply button on the bottom of the screen.
Press the reply button again. This will take you to Screen 3.
Screen 3: Drop Departure Message
Scroll down until you can see “POD Name”
Press the box beside POD Name
Enter in the name of who signed your BOL. If using virtual keyboard, then you will need to press the red X after you enter this information.
Press Send.
Confirm that you wanted to send the message, by pressing yes when prompted.

9. How to Request Directions
From the Messaging Screen 1:
1. Press the Compose button.
2. Scroll down till you see “Customer Info Request” or Macro 14
3. Press the message to highlight it. This will take you to screen 3
Screen 2: Put in Customer Alpha code
1.Highlight the box.
2. Enter the alpha code for the customer. (You can get this from the Arrival messages or the Departure message)
3. Press send. Then wait for the message to come through to the Qualcomm unit.
Screen 3: When message comes to Qualcomm unit.
1. Press the Inbox Icon.
2.Customer Info message is shown
3. Press the message. This will take you to screen 5.
Screen 4: The directions for the stop
1. Scroll down to read all of the message.
2. If you want to keep these directions. Press the back arrow, in the lower left hand of the screen.
3. This will take you back to the previous screen you were viewing.

10. Delete Messages How to reset the screen While the message is open:
Press the delete button
Deleting more than one message
From the messaging screen:
1. Press the delete all button. This will delete any message that has been opened.
2. To check to see if you have opened the message, the little envelope will be in the open position.
How to reset the screen
1. Press the upper right button that looks like a person talking.
2. Hold this button down for 7 seconds.
3. Hold down the button in the middle of the four arrows. Looks like it has a dot on it.
4. Press this button down for 7 seconds.
5. The screen will go blank for a few seconds. Then will come back on. The computer has to reboot, so you probably will see some numbers and letters scrolling until the computer reboots.

11. Logging out of Total Mail
Screen 1: Home Screen
1. Press the Messaging icon, this will take you to screen 2
Screen 2: Messaging Screen
1. Press the Compose icon
2. Scroll down to the “Driver Logout” macro
3. Press the “Driver Logout” macro. This will take you to screen 3.
Screen 3: Driver Logout Macro
Press the box beside Driver Id.
Press send.
Confirm that you want to send the message.
You have now logged out of Total Mail.

12. Logging out of Qualcomm
Screen 1: Home Screen
Press the Login icon. This will take you to screen 2.
Screen 2: Login Screen
Press the Logout button on the bottom of the screen.
You have now logged out of Qualcomm.