1. ORDER ENTRY MANAGEMENT SYSTEM (OEMS)
April 11, 2017
Order Entry - Electric
ORDER ENTRY MANAGEMENT SYSTEM (OEMS)

2. Customer Profile Setup the customer profile: Information Needed:
Utility Name
Product Line
State
Contact Person
Serial Number format
Nameplate type
Data File Type (standard or custom)
If Sensus ESM meters are going to be ordered, then an .IXI and .IXT file is required to be attached to the customer profile.
There needs to be a separate Customer Profile for each Product Line (i.e. Sensus, Honeywell, Aclara, Ally)

3. Configuration
This is INTERNAL SETTINGS... How does the meter behave This is where you create a BILLING QUANTITIES, ALARMS, ETC.
Primary Info – Customer, meter form, etc. This ties Configuration to Order Spec.
Features – Basic Features, Energy Type, TOU, Etc.
Demand Configuration – Demand Setup (Enabled? Interval setup
Display – How many digits and what quantities are on the LCD
DST Settings – Does the meter follow DST?
Smart Point Options – Frequency, Alarm settings, Voltage Average Window, Outage Timing, Time Zone, Read Resolution
Security Options – Does the meter ship encrypted?
Attachments – If ESM, need configuration file.

4. Order Specification
This is HARDWARE setup... What does it take to physically build a meter? This is where you create a STOCK NUMBER and join it with the Configuration

5. Order Spec + Configuration
Order Spec’s need a valid configuration associated to it to produce a functional meter. Multiple Configurations may be available for an order spec. This is ok, but be careful which one you choose!!! Name them uniquely!

6. Stages (Workflow) Customer Profile

7. Stages (Workflow) Configuration

8. Stages (Workflow) Order Specification

9. Configurations of ESM vs. Non ESM Sensus Meters
Configurations for non-ESM meters are created in OEMS
Configurations for ESM meters are created in iConfig
*The output of iConfig is a .XEC file which will need to be added to the configuration in OEMS.

10. LETS DEMO!!!!!!!!!!!

11. Order Entry Third Party (Honeywell, Aclara)
ORDER ENTRY MANAGEMENT SYSTEM (OEMS)

12. Customer Profile
If you are entering Third Party meters, there is likely already an electric customer profile.
CLONE!!!!!
You will now have a new Customer Profile in created state. Chose your third party.

13. Customer Profile Select Your Serial Number Format
Chose your nameplate.

14. Configuration
This is where you upload your third party meter program.

15. Order Specification
This is HARDWARE setup... What does it take to physically build a meter? This is where you create a STOCK NUMBER and marry it up to the configuration.

16. Configuration
Work with an MTS to create a FlexNet .INI file

17. Configuration
Attachments complete

18. Order Spec + Configuration
Order Spec’s need a valid configuration associated to it to produce a functional meter. Multiple Configurations may be available for an order spec. This is ok, but be careful which one you choose!!! Name them uniquely!

19. Configurations of ESM vs. Non ESM Sensus Meters
Honeywell – ESM vs non-ESM is all handled in the .INI file. Work with your MTS Aclara (GE) – Only available in ESM

20. LETS DEMO!!!!!!!!!!!