1. © 2016 HDP User Group International, Inc. All rights reserved
TV Stack-up L4 L3 L2 L1
TWO TV’s: Fab may choose to put both on same panel or break up into separate builds
MS uses L4 Signal and L3 Ground; SL uses L2 for Signal and L1&L3 for Ground
© 2016 HDP User Group International, Inc. All rights reserved

2. MS = Microstrip Test Cases
Bottom Ground Plane Only (L3)
Seq#
Qty
Copper Coverage
Tx Line Width (mil)
Pattern
X-Hatch Circle D (mil)
X-Hatch Pitch (mil)
X-Hatch Square Side (mil)
(Glenn) Polar Impedance [W]
(Farhad) CST Impedance [W] 1
100% 4
N/A 47
46.5 2
5.5 39
39.1 3 7 34 10 27 5
45%
Circle 12 33 6
35% 30 56
33% 50 54 72 8
31%
Diamond 36
35.5 9
27% 35
52.3
26% 58 60
63.4 11
54% 13
42.4
51% 42
60.6 63 79 14
49% 44 15 59
57.7 16 70
70.4 17
76% 18 46
75% 53
62.7 19 89
72.3 20
45.1 21 66
62.3 22
100 77
68.17
© 2016 HDP User Group International, Inc. All rights reserved

3. SL = Stripline Test Cases
Top and Bottom Ground Planes (L1&3)
Seq#
Qty
Copper Coverage
Tx Line Width (mil)
Pattern
X-Hatch Circle D (mil)
X-Hatch Pitch (mil)
X-Hatch Square Side (mil)
(Glenn) Polar Impedance [W]
(Farhad) CST Impedance [W] 1
100% 4
N/A 47
47.9 2
5.5 39 40 3 7 34
34.5 10 27
26.9 5
45%
Circle 12
27.4 6
35% 30 33
42.5
33% 50 54
55.6 8
31%
Diamond 32
29.6 9
27% 35
46.5
26% 58
59.3 11
54% 13
34.6
51% 42
48.5 63
61.8 14
49%
36.3 15 49 53 16 70 57
65.3 17
76% 18
39.2
75%
51.8 19 89
57.8 20 46
40.3 21 60 55
58.2 22
100
63.65
© 2016 HDP User Group International, Inc. All rights reserved

4. Launch Details (MS shown)
© 2016 HDP User Group International, Inc. All rights reserved

5. Launch Details (SL shown)
© 2016 HDP User Group International, Inc. All rights reserved

6. © 2015 HDP User Group International, Inc. All rights reserved

7. Connector and Stiffener
Connector needs a stiffener to provide intimate contact and to act as a shim since the connector is designed for thick rigid boards.
Stiffeners can be re-used with connectors.
© 2015 HDP User Group International, Inc. All rights reserved

8. © 2016 HDP User Group International, Inc. All rights reserved
Panel Design
© 2016 HDP User Group International, Inc. All rights reserved

9. Flow Chart Materials Hatched Plane TV Design Fabricate TV Test
Select Laminate Materials
Procure Materials
Panasonic
DuPont
Impedance
Loss –DuPont/Introbotix
Design TV w/ Gerber files
Ciena
Fabricator(s)
TTM
DOE Definition
Down-select Objective/Goals
3D Simulations –Mflex?
2D Simulations - TBD
Finalize Test coupon designs
Analyze Data
DuPont/Nokia
Write Report
TBD
Present Report
Close Project
© 2016 HDP User Group International, Inc. All rights reserved

10. © 2015 HDP User Group International, Inc. All rights reserved
Resource & Schedule
Task
Owner
Planned Schedule
Actual Schedule
DOE Definition
Polar
Q4’ 15
Completed
Design TV coupons
DuPont
In-progress
Generate Gerber/Design Files
DuPont / Ciena
Q1’ 16
Procure TV laminate
DuPont / Panasonic
Q1’16
Fabricate TV
TTM / Microconnex
Q2’16
Test - Measure Coupons
DuPont / Introbotix
Q3’16
Analyze Data / Compare Si to Models
DuPont / Nokia-US
Write Report
Team
Q4’16
Present / Publish Findings
© 2015 HDP User Group International, Inc. All rights reserved