1. Using an Epsilon trap….
Call that a cow!
Who are they
kidding?

2. Pick a clear area.

3. Cut back the vegetation

4. and clear the ground where the trap will be.

5. Unpack the trap...

6. You need ropes, pegs and poles...

7. cages to retain the flies...

8. and a few simple tools such as a hammer.

9. The trap uses three types of pole.

10. The three long poles are placed at each corner.

11. The pole with a flat end is placed at the back.

12. Look for a small sleeve at the trap entrance...

13. …and insert the shortest pole into this sleeve.

14. Insert the pole all the way into the sleeve.

15. Pass the ropes through the loops at each corner.

16. Make a note of the wind direction and...

17. ...orientate the trap so the entrance is downwind

18. Hammer the pegs into the ground and...